Operating instructions

PM1200 Mobile Radio with Control Head 23
Radio Firmware Features
10.12 Revert Memory Channel 2
The assigned ‘Memory Channel 2’ PF button allows you to
immediately change to the associated programmed channel.
10.13 Selectable Tone
The assigned ‘Selectable Tone’ PF button allows you to use the
channel selector knob to select a PL Tone.
10.14 Alpha Numeric
This feature allows you to switch the display between Group/Channel
Number, and Group/Channel name (Alpha Numeric) by pressing the
assigned ‘Alpha Numeric’ PF button. A tone will sound each time you
switch between numerical and alpha numerical display.
10.15 Intercom
This feature requires dual control head configuration. Press the
assigned ‘IC’ PF button to turn the Intercom feature ON or OFF. While
ON, you can press the PTT button to communicate to another control
head operator without transmitting over the air. When this PF button
is pressed, a tone sounds and
appears on the display. The
Intercom can also be used while receiving a call.
PM1200.book Page 23 Wednesday, October 10, 2007 2:44 PM