Remote Speaker Microphone User Guide

English

Receiving

When the RSM is connected to the radio accessory

connector, the radio’s speaker is muted, and the audio is

only heard from the RSM speaker. Similarly, when a

secondary receiver audio accessory is plugged into the 3.5

mm audio jack (PMMN4015), audio to the RSM is rerouted

to the secondary accessory.

Transmitting

To transmit using your RSM:

1. Press and hold the Push-To-Talk (PTT) button on the

RSM.

2. Speak into the RSM.

3. Release the PTT when finished.

Note: Connecting the RSM to the radio does not disable the

radio’s microphone and PTT.

REMOVING THE RSM

Turn the radio off before removing the RSM from the radio.

Remember to reattach the radio accessory connector seal

to the side of the radio when an accessory is not being

used.

USING THE ORANGE EMERGENCY BUTTON

The orange button on the RSM remotely activates the

same function that is programmed for the radio’s orange

button. Your radio’s user guide contains a full description of

the emergency mode and other programmable functions

that are available through these buttons.

Note: 1. The RSM Emergency button does not turn radio on as

does the radio’s emergency button.

2. The RSM orange button does not exit emergency mode.

Use radio control to exit emergency mode.

RSM.book Page 3 Thursday, August 4, 2005 9:54 AM