Service manual

August 30, 2002 99R85452E01-O
2-10
Maintenance
: Radio Reassembly — Detailed
7. Place the front cover over the tabs on the rear diecast.
8. Insert the On/Off Volume shaft into the front cover opening.
9. Lower the front cover until the bottom edges snap firmly into place on the rear diecast (
See
Figure 2-12.
).
10. Tighten the two (2) screws at the bottom of rear diecast using a screwdriver (
See Figure
2-13.
).
11. Reinsert the PTT button (
See Figure 2-15.
).
Figure 2-12.
Figure 2-13.
Figure 2-14.
Press to insert
Large hook side