Cellular Telephone Owners Manual
WELCOME WELCOME Thank you for selecting Motorola—a world leader in cellular technology. All Motorola cellular phones are designed and manufactured in the United States to meet Motorola’s exacting specifications and world class quality standards. This phone is no exception. This personal phone withstands our rigorous durability tests including temperature, humidity, shock, dust, vibration, and a drop test.
GENERAL SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . 6 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PHONE OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Preparing Battery for Initial Use . . . . . . . . . . . . . . . . . . . . . 12 Attaching the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Removing the Battery . . . . . . . . . . . . . . . .
TABLE OF CONTENTS Clearing Entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Recalling from Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Memory Scrolling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Recalling Last Number Called . . . . . . . . . . . . . . . . . . . . . . 24 Recalling Area Code / Prefix (Postscripting) . . . . . . . . . . . . 24 Turbo Dial™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS SECURITY FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Electronic Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Displaying Unlock Code . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Changing Unlock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Automatic Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Outgoing Call Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . 38 ACCESSORIES .
GENERAL SAFETY INFORMATION GENERAL SAFETY INFORMATION IMPORTANT Read This Information Before Using Your Hand-held Portable Cellular Telephone First introduced in 1984, the hand-held portable cellular telephone is one of the most exciting and innovative electronic products ever developed. With it, you can stay in contact with your office, your home, emergency services, and others. For the safe and efficient operation of your phone, observe these guidelines.
GENERAL SAFETY INFORMATION Do not hold the antenna when the phone is in use. Holding the antenna affects call quality and may cause the phone to operate at a higher power level than needed. Antenna Care and Replacement Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin a minor burn may result. Replace a damaged antenna immediately. Take your phone to a qualified service center for repair. Use only the supplied or approved antenna.
GENERAL SAFETY INFORMATION To prevent possible interference with aircraft systems, Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent interference with cellular systems, FCC regulations prohibit using your phone while the plane is in the air. Children Do not allow children to play with your phone. It is not a toy.
GENERAL SAFETY INFORMATION The design of Motorola’s cellular telephone complies with all applicable RF Safety Standards. Motorola meets the standards and recommendations for the protection of public exposure to RF electromagnetic energy established by governmental bodies and other qualified organizations, such as the following: • National Council on Radiation Protection and Measurements (NCRP). Report 86. • Department of Health and Welfare Canada Safety Code 6.
PHONE OVERVIEW 1 2 888 8888888 3 4 5 6 7 5 8 10
PHONE OVERVIEW 1 Retractable Antenna — Extend for optimum performance. 2 Earpiece 3 Status Indicators — Flash or light steadily to alert you to a number of conditions: IU (In Use) — Flashes while a call is in process. RM (Roam) — Flashes if phone is accessing a service area outside of your home system. NS (No Service) — Flashes or lights steadily if the phone is beyond the range of a cellular system. While lit, calls cannot be placed or received (See Service Area, page 47).
GETTING STARTED GETTING STARTED Preparing Battery for Initial Use The Nickel-Cadmium or Nickel Metal Hydride Battery supplied with your telephone must be fully charged before placing your phone into service. The batteries are shipped from the factory in a discharged state in order to extend the life of the battery. It is recommended that you charge new batteries overnight, but not longer than 24 hours, using a Motorola-approved charger. WARNING: Battery may explode if exposed to fire.
GETTING STARTED Attaching the Battery 1. Place the battery pack on the phone so that its grooves align. Align the top of the battery with the line on the back of the phone right below the arrows. 2. Slide upward in the direction of the arrows on the back of the phone until it clicks into place. Battery Attachment Removing the Battery 1. Turn your telephone off. 2. Depress the latch button on the rear of the battery and slide the battery pack downward until it stops. 3. Lift the battery off.
GETTING STARTED Quick Change Method The Quick Change Method allows you to remove your telephone battery at any time and replace it with a charged spare battery during a telephone call. This is especially useful if you receive the Lo BAT(low battery) message or audible tone during a call. Simply remove the battery from the telephone, put on the spare battery, and press ∏. This will return you to your telephone call. The phone will not go through the normal power-up cycle described on page 15.
Tu r n P h o n e O n 1. Extend antenna for optimal performance. 2. Press ∏ once. 3. Check the status indicators and display messages before placing a call. No Service Indicator In Use Indicator Roam Indicator 888 8888888 Start-up Self Tests Each time the telephone is turned on, it performs a series of self tests, sounds a tone, and lights all display positions and status indicators to check their operation.
BASIC OPERATION Status Indicators Explanation Indicators IU (In Use Indicator) 888 8888888 •Flashes when call is in progress. NS (No Service Indicator) 888 8888888 •Flashes or lights steadily if phone is beyond range of a cellular service area. •Calls cannot be placed received while NS is lit. or RM (Roam Indicator) 888 8888888 •If slow or rapid flashing, you are accessing a service area outside of your home system. Slow Flashing Roaming on a home type system.
BASIC OPERATION Placing a Call 1. With the power on, enter the number you wish to call. 2. Press Í. 3. Begin the conversation when the called party answers. 4. To terminate the call, press ´. To Correct an Error To clear the last digit entered, press and quickly release Ç. To clear the entire entry, press and hold Ç until the entire entry is erased. If Entering More Than 10 Digits You can call a phone number with up to 16 digits, but only the last 10 digits will appear in the display.
BASIC OPERATION Automatic Redialing Your telephone includes a convenient feature designed to make repetitive call attempts automatically when a cellular system is busy. If you receive an alternating high/low signal (intercept) or the fast busy tone (reorder signal) when attempting to place a call and wish to retry the call, press Í before ending the unsuccessful call attempt. REDIAL is then displayed. Your telephone will make the call attempt continuously over the next 4 minutes.
BASIC OPERATION 888 8888888 888 8888888 Weak Signal Strong Signal The SSM appears every time you turn your phone on. After 8 seconds, the SSM will continuously flash the relative strength of the signal received by the phone. To best utilize the SSM, you should familiarize yourself with the relative Signal Strength levels and their associated Call Placement and Call-in-Progress qualities. Displaying Battery Voltage Meter 1. Press Ï, ›.
BASIC OPERATION Adjusting Earpiece Volume Press and hold ≥ or ≤ to raise or lower the earpiece volume level. Adjusting Ringer Volume 1. Press Ï. 2. Press and hold ≥ or ≤ to raise or lower ringer volume level. Volume Meter The Volume Meter represents the current volume setting and will appear in the display whenever you adjust the earpiece or the ringer volume. v v= Lowest Volume Highest Volume The volume level is displayed as a bar graph following the letter v at the left side of the display.
BASIC OPERATION Tw o - S y s t e m O p e r a t i o n Your telephone can operate over two different home systems if you have made proper arrangements with your Cellular System Operator. Both are designated as your “home system” but are accessed with separate telephone numbers. While you may switch from one system to the other, only one of the two can be active at any given time. Calls are placed and received through the active system only. Switching to a Second Phone Number 1. Press ‰, £, Ø. 2.
BASIC OPERATION Antenna System The Antenna System of your telephone is designed for optimum performance with the antenna extended. MEMORY There are two parts to the antenna, one internal and one retractable. This allows you to receive calls on your telephone without having the antenna extended. If NS (No Service) flashes or lights steadily, you may be calling from a fringe coverage area. It will be necessary to fully extend the antenna for optimum performance.
MEMORY If you wish to save to that location, thus overwriting and erasing the old information, press Ø. If you wish to store the entry in an alternate location, press ´, Ø and the alternate location number. Changing Entries 1. Press ‰ and the two-digit location number so that the number to be changed is displayed. 2. Press and release Ç to back out each of the digits dis played. 3. Enter the new number. 4. Press Ø and the two-digit location. The location number and FULL will display.
MEMORY useful when searching for a specific number in memory when you are not certain of its location. 1. Press ‰, then the memory location where you wish to begin your review. The location number and digits stored will appear in the display. The appearance of an apostrophe ( /) following the location number confirms that you have enabled memory scrolling. 2. Press £ to scroll forward through the items. 3. Press • to scroll backwards.
MEMORY 1. Press and hold digit keys until the IU (In Use) indicator lights. This indicates that the call has been initiated. Once numbers have been stored in Memory Locations 02 through 09, calls can be placed from these locations by pressing and holding the associated key for approximately 1 second. There is no need to press Í. (01 is reserved for Emergency Dialing). O n e - To u c h E m e r g e n c y D i a l i n g 1. Press and hold ⁄ until EMRGCY displays.
MEMORY If your party gives you another number to call, simply enter it from the keypad. If you make an error, press Ç to erase the last digit entered or hold Ç to erase the entire entry. Advise your party that they will hear tones as you store the number. To call the Scratch Pad number at the end of an outgoing conversation, press ´, Í.
MEMORY maximum of 24 digits. (Each pause occupies a digit.) However, in order to store this information to a memory location, each sequence can only contain 16 digits. 5. To store a Linked Sequence, press Ø, then enter the twodigit location number where you wish to store the number. Two-Part Calling, as described on page 26, can be automated by a unique feature which permits the programming and memory storage of pauses between groups of numbers.
MEMORY IMPORTANT: Do not add PIN Code in Linked Sequence. Phone will automatically insert PIN Code when placing a Linked Call. Follow instructions on page 33. Placing a Linked Call Follow the procedure shown below to place a Linked Call from a sequence already stored to a memory location (see the example on the previous page to construct this sequence). 1. Recall the Linked Sequence from its memory location by pressing ‰, two-digit memory location. 2.
These features are designed to simplify operation or provide additional convenience during special situations. The Feature Menu permits you to review, enable or disable most of your telephone’s features through the keypad and display. To E n a b l e / D i s a b l e a S p e c i f i c F e a t u r e 1. Press Ï, ⁄. 2. Scroll the menu by pressing • or £ until the desired feature displays. 3. Press Ç to change the status of the displayed feature between on and off. 4. Press ´ to exit the Feature Menu.
FEATURES Distinctive Ringer Your phone includes a new feature called Distinctive Ringer. This feature allows you to access one of nine different ringer styles. When this feature is selected, the phone will provide a brief sample of that ringer style. 1. Press Ï, ⁄. 2. Scroll the menu by pressing • or £ until the display shows: RiNGER STYLE 3. Press Ç once to select this feature. The selected ringer will sound as an example of this ringer style. The ringer style will show: SELECT 1-9 4.
FEATURES AvTo ANSR ON Feature enabled AvTo ANSR OFF Feature disabled To change this feature’s setting, enter the Feature Menu by following the instructions listed on page 29. Multiple Key Answer This allows the user to answer an incoming call by pressing Í, ≤ or ≥ or any digit key, after the first ring has been completed. 1. To activate this feature, enter the menu by pressing Ï, ⁄. 2. Scroll with the • and £ keys until you get to: MKEY ANSROFF 3. Use Ç to turn feature on or off.
FEATURES O n e - To u c h E m e r g e n c y D i a l i n g Memory Location 01 may be used for an emergency number that you may wish to dial, even if your phone is locked. EMRGCY CAII ON Feature enabled EMRGCY CAII OFF Feature disabled To change this feature’s setting, enter the Feature Menu by following the instructions listed on page 29.
FEATURES R e m i n d e r B e e p s (Available in some models only) Your Cellular Carrier may offer enhanced features such as Short Messaging. Ask your Cellular Service Provider if this is supported in your system. If Short Messaging is not supported in your system, Reminder Beep selection will have no effect. Reminder Beep is an audible notification to alert the user that they have received a message. It will beep every 2 minutes until the new messages have been read. 1. Press Ï, ⁄. 2.
FEATURES 1. Enter the number you wish to call. 2. Press Í. 3. Wait for double tone “Beep Beep”. 4. Press Í. The phone will automatically send the PIN Code (stored in Memory Location 07). If you enter a service area which does not require a PIN Code, disable the feature in the Feature Menu. Feature Status Review To Review Status 1. Press Ï, ‚, ·, ‰. 2. Press • or £ to scroll messages. To End Review 1. Press ´. Status Review permits you to scroll through your operating settings for your reference.
Call Timers provide a useful means of monitoring the air-time spent in conversation. Several of these operate in the background and can be displayed at any time. Each timer begins counting as a cellular channel is assigned, or when the phone rings to signal an incoming call. If an incoming call is not answered, the timers revert to their previous values. Individual Call Timer To Display 1. Press ‰, £, £. This timer accumulates the air-time of a call in minutes and seconds.
TIMERS One Minute Beep 1. Press Ï, ⁄. 2. Scroll the menu by pressing • or £ until the display shows: ONEMiN TMRON Feature enabled ONEMiN TMROFF Feature disabled 3. Press Ç once to turn this feature on or off. 4. To exit the Feature Menu, press ´. Provides a tone ten seconds before the end of each minute during calls.
Your telephone offers several forms of security features against unauthorized use. Activating these features requires either your three-digit unlock code, or the six-digit security code. The factory programmed unlock code is 1, 2, 3 and the factory programmed security code is 000000. NOTE: It is common for the unlock code to be the last 3 digits of your phone number when it is programmed by your carrier. Electronic Lock To Lock 1. Press Ï, and hold fi. 2. Phone will display Loc?. 3.
SECURITY FEATURES Changing Unlock Code 1. Press Ï, ‚. 2. Enter your six-digit security code. 3. Enter the new desired three-digit unlock code. 4. Press Ø. The new unlock code will display to confirm storage. Automatic Lock This feature automatically locks your phone each time the unit is turned off. 1. Press Ï, ⁄. 2. Scroll the menu by pressing • or £ until the desired feature displays. 3. Press Ç once to change the status of the displayed feature between on and off. 4. Press ´ to exit the Feature Menu.
SECURITY FEATURES Description Display No restrictions. (Standard setting) LEVEL 4 Phone will place calls only from memory locations 01-10. No keypad dialing. No memory storage. If locations 01-10 are cleared, no outgoing calls can be made. LEVEL 1 To change the unit to unrestricted operation, use the procedure above and enter service level 4. Motorola offers a variety of accessories for use with your cellular phone. The accessories packaged with your phone may vary.
ACCESSORIES battery. Nickel metal hydride batteries are high capacity batteries which offer up to 30% more talk time than comparable nickel cadmium batteries. Several sizes and capacities are available. To help achieve maximum life and capacity of your new nickel metal hydride battery, it is suggested that you charge with Motorola approved chargers, and do not leave the battery in the charger for more than 24 hours.
ACCESSORIES the same direction as the front of the telephone. You will hear a click to indicate that the connection has been properly made. Plug the AC Charger/Transformer in an AC wall outlet. In order to optimize battery charge time, plugging in the AC Charger/Transformer will power your phone off. The phone cannot be powered on while the AC Charger/Transformer remains plugged in. If you need to make or receive a call, you will need to unplug the AC Charger/Transformer from the phone.
ACCESSORIES NOTE: It is recommended that Talk Pak batteries be charged in the front pocket. The battery in the front pocket has priority and if it is in range, is rapid charged first. Once the rapid charge of the front pocket battery is complete, the charger switches to rapid charge of the second battery.
ACCESSORIES Ultra Saver The optional Ultra Saver requires no installation and allows you to power your telephone from a vehicle’s battery via the cigarette lighter. This is particularly valuable when driving rental cars. While using the Ultra Saver, you conserve your phone’s battery, and also provide a slow charge to the battery. To attach the Ultra Saver to your phone, locate the metal contacts on the flat side of the Ultra Saver connector, as well as those on the bottom-rear of the phone.
ACCESSORIES coil cord from the telephone by squeezing both sides of the Ultra Saver connector until the tabs release, then press ∏. This will return you to your telephone call. The phone will not go through the normal power-up cycle described on page 15. You will only have five seconds to complete this action before your telephone call is terminated. Advise the party on the other end of the call before beginning this procedure.
ACCESSORIES set while driving a vehicle. Please check the laws of your jurisdiction before purchasing or using a headset. THE Portable Cellular Connection™ Interface Your phone is data compatible and may be used in conjunction with THE Portable Cellular Connection Interface to connect to peripheral devices that are compliant with telephone industry RJ-11 specifications.
ACCESSORIES Compaq Direct Connect The direct connection cable allows Compaq computers using Compaq’s SpeedPAQ™ 144 internal modem to transmit data or FAXes over the cellular system. Simply connect one end of the cable to your phone and the other end to the cellular connector on the modem. SpeedPAQ is a trademark of Compaq Computer Corporation.
There are generally two types of cellular systems serving any metropolitan area. One of these will most likely be operated by the telephone company that provides telephone service to your community, generally referred to as a wireline carrier. The other Cellular Service Provider is a radio common carrier, referred to as a non-wireline carrier. Your Cellular Service Operator will provide information concerning specific features, procedures, and coverage in your particular area.
ROAMING AND SYSTEM OPERATION Contact your system operator, or that of the visited system, for information on dialing and billing procedures. To use alternate long distance services when roaming, be certain to dial the appropriate area code and local number to access the alternate carrier in the visited area. Then use the Tone Dialing sequence described on page 26. If you selected Two-System Operation (see page 21) enter ‰, £ to verify the currently active number.
ROAMING AND SYSTEM OPERATION System Type Selection Display If home system is wireline (type B) SCAN AB Flashing RM (Roam) indicator = call on A system Slow flashing RM (Roam) indicator = call on home type system Slow flashing IU (In Use) indicator = call on home system XOME Home Only Mode Phone will not operate outside its home system. SCAN A Scan A Mode Phone will operate only within non-wireline (A) systems. SCAN B Scan B Mode Phone will operate only within wireline (B) systems.
ROAMING AND SYSTEM OPERATION NOTE: Constant flashing of the RM (Roam) indicator, or a steadily lit NS (No Service) indicator while within your home service area may indicate an unintentional choice has been made. If this occurs, re-enter System Type Selection to see if the unit is operating in Standard Mode, or if an alternate selection has been made. C Scan Your Motorola cellular telephone may be equipped with a special level of A/B System Selection called C Scan. Check with your service shop.
Is the unit locked? See Electronic Lock, page 37. Is the NS (No Service) indicator lit? See page 16. Is a unique operating mode programmed? Constant flashing of RM (Roam) while in your home service area may indicate that an incompatible System Type has been selected. See System Type Selection, page 48. Is the unit operating with non-standard settings? If when you first turn the unit on, o is displayed, you may have inadvertently selected improper operating characteristics.
MESSAGE GLOSSARY MESSAGE GLOSSARY A • key displayed as “A” A1 System “A” phone number 1 A2 System “A” phone number 2 AUTO ANSROFF Automatic Answer feature MKEY ANSROFF Multiple Key Answer Feature B1 System “B” phone number 1 B2 System “B” phone number 2 Battery Meter C Precedes Cumulative Timer display (also used to display £ key) CALL Shows incoming call, Call in Absence, or Weak Signal Alert CHANGE? Overwrite number in Selected Memory Location C SCAN System Type Selection (default settin
MESSAGE GLOSSARY EMRCY OFF Emergency Dialing feature FULL Selected Memory Location is full XOME System Type Selection — Home Mode LEVEL 1 Call Restriction selected LEVEL 4 No Restrictions (standard setting) AUTOLOCKOFF Automatic Lock feature LO BAT Low Battery Loc/D Unit is locked MUTE Microphone muted No SERvicE No Service oN Telephone is on PiN AcTivE PIN Code Activation PREF /D SiDS System Type Selection (SID mode) R Precedes Resettable Call Timer Display REDIAL Automatic Redial
MESSAGE GLOSSARY REMiND MSGON Reminder Beeps Signal Strength Meter SCAN A System Type Selection (scan non-wireline “A” only) SCAN AB System Type Selection (scan “A” type first, then “B”) SCAN B System Type Selection (scan wireline “B” only) SCAN BA System Type Selection (scan “B” type first, then “A”) STD All user features set to standard STD AB System Type Selection (non-wireline standard mode) STD BA System Type Selection (wireline standard mode) SYSTEM BvSY System Busy v= Volume Meter v
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Adjusting Earpiece Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Adjusting Ringer Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Antenna System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Attaching the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Displaying Battery Voltage Meter . . . . . . . . . . . . . . . . . . . . . . 19 Displaying Own Phone Number . . . . . . . . . . . . . . . . . . . . . . 20 Displaying Unlock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Distinctive Ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Earpiece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Electronic Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Mouthpiece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Multiple Key Answer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Muting Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Nickel Metal Hydride Batteries . . . . . . . . . . . . . . . . . . . . . . . 39 Number Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Recalling Last Number Called . . . . . . . . . . . . . . . . . . . . . . . . 24 Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Reminder Beeps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Resettable Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Roaming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX TIMERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Tone Dialing (Two-Part Calling) . . . . . . . . . . . . . . . . . . . . . . . 26 Turbo Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Turn Phone On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Two-System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Ultra Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PATENT INFORMATION PATENT INFORMATION Manufactured under one or more of the following U.S. patents: 4121218 4124879 4127824 4138681 4193036 4254382 4302845 4312074 4327319 4329666 4369516 4369522 4378603 4390963 D269873 4398265 4400584 4400585 D270835 D271491 Re.
Turn On Press ∏. Unlock Enter the three-digit unlock code. If you make an error, press Ç and enter again. Place Call Enter number, press Í. Turbo Dial Press and hold any digit key ¤ - ·. Dials number stored in that memory location. Receive Call Press Í. End Call Press ´. Store Number Enter number, press Ø, then the two-digit Directory Location Number. Recall Number Press ‰, then the two-digit Directory Location Number. Call Number Displayed Press Í. Lock Unit Press Ï, fi, Ø.
THIS PRODUCT MAY BE POWERED BY A RECHARGEABLE BATTERY WHICH MUST BE RECYCLED OR DISPOSED OF PROPERLY. • Refer to the battery label for battery type. • Recycling facilities may not be available in all areas. • For additional information regarding disposal or recycling call 1-800-331-6456. For information about your product, or accessories for your product, please call Motorola’s Cellular Customer Response Center; in U.S.,1-800-331-6456; in Canada, 1-800-461-4575.
