QIP7232 P2 Hybrid QAM/IP High-definition Set-top Quick Start Guide
Before You Begin Introduction Congratulations on receiving a Motorola QIP7232 Hybrid QAM/IP High-definition Set-top. This document will help you set up your Hybrid QAM/IP HD Set-top to quickly get it up and running. READ THIS FIRST 1. Determine if you are connecting to a: High-Definition TV or monitor Use the HDMI, component video (YPbPr), or IEEE-1394 outputs. No other video connection supports HDTV.
Before You Begin Front Panel The front panel controls provide functional navigation if the remote control is lost or is temporarily out of service. Certain functions, such as those requiring a numeric entry, require a remote control. Some connectors are not enabled and require the support of application software.
Connecting Your Device Cabling to an HDTV for Video For the best possible HDTV video quality: 1. If the TV has an HDMI input, connect it to the QIP7232’s HDMI output. If the TV has a DVI input, you can connect it to the QIP7232’s HDMI output using an HDMI-to-DVI converter cable or adapter. 2. If the TV has neither an HDMI nor a DVI input but has an IEEE-1394 input, connect it to the QIP7232’s IEEE-1394 output. If you use IEEE-1394, on-screen graphics do not display.
Connecting Your Device Cabling to an HDTV for Audio QIP7232 Quick Start Guide 4
Connecting Your Device Cabling to an HDTV and an A/V Receiver for Video Note: If the A/V receiver includes an HDMI input and output, the QIP7232’s HDMI output can be connected directly to the A/V receiver’s input and the A/V receiver’s HDMI output directly to the TV. Because HDMI provides both video and audio output, no additional audio connections to the A/V Receiver and TV are required.
Connecting Your Device Cabling to an HDTV and an A/V Receiver for Audio Note: If the A/V receiver includes an HDMI input and output, the QIP7100’s HDMI output can be connected directly to the A/V receiver’s input and the A/V receiver’s HDMI output directly to the TV. Because HDMI provides both video and audio output, no additional audio connections to the A/V Receiver and TV are required.
Connecting Your Device Cabling to a Standard-Definition TV QIP7232 Quick Start Guide 7
Connecting Your Device Cabling to a Standard-Definition TV, A/V Receiver, and VCR Note: Because some entertainment equipment cannot simultaneously support composite video and S-Video, never simultaneously connect both video inputs. Note: This connection method does not support HDTV. For information, see Cabling to an HDTV for Video.
Troubleshooting Troubleshooting Troubleshooting guidelines follow. If problems still occur after performing the diagnostics, call your service provider for assistance.
Troubleshooting Problem — If this occurs: No graphics or program guides appear on the TV screen No closed captions display Solution — Then do one of the following: If you use the IEEE-1394 connection, on-screen graphics, including closed captions and program guides, are not displayed by the QIP set-top. On-screen graphics and captions may still be overlaid by your TV, if enabled. Alternatively, use HDMI or component video.
© Motorola, Inc. 2009. All rights reserved. www.motorola.com MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. No part of the contents of this document may be reproduced or transmitted in any form or by any means without the written permission of the publisher. 365-095-12582 x.