Operation Manual

43Wireless
3 Touch Configure Mobile Hotspot to change hotspot
security and configuration settings:
•Network SSID—Enter a unique name for your
hotspot and touch
Next .
•Security—Select the type of security you want,
and touch
Save : WEP , WPA , or WPA2 . Enter a
unique password. Other users can access your
Wi-Fi hotspot only if they enter the correct
password.
Note: Keep it secure. To protect your smartphone
and hotspot from unauthorized access, it is
strongly recommended that you set up hotspot
Security ( WPA2 is the most secure), including
password.
• Broadcast Channel—Select a channel that
minimizes potential interference. You may need
to try different channels after your hotspot is
active for a time.
4 Touch
Save when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot’s
SSID ,
selecting a
Security type, and entering the correct
Wireless password .
Bluetooth® handsfree devices
Turn Bluetooth power on or off
Find it: Menu > Settings > Wireless & networks
>
Bluetooth
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
2 Touch Menu >
Settings > Wireless & networks
>
Bluetooth settings .
3 Touch
Bluetooth to turn on and scan. If Bluetooth
power is already on, touch
Scan for devices .
4 Touch a device to connect.
5 If necessary, touch
OK , or enter the device passkey
(like
0000 ) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.