Installation guide

Switch Security
6-28
2. Click the Attach-L2/L3 tab.
3. Refer to the following information as displayed within the Attach - L2/L3 tab:
4. Select an interface and click on Edit to modify the ACL interface, IP ACL and MAC ACL values.
5. Select an interface and click the Delete button to delete the ACL from the list available (but not from
the switch).
6. Click on Add button to add an physical or VLAN interface to the switch. For more information, see
Adding a New ACL L2/L3 Configuration on page 6-28.
6.5.3.1 Adding a New ACL L2/L3 Configuration
After creating an ACL, it can be applied to one or more interfaces. ACLs are applied on layer 2 and layer 3
interfaces in the inbound direction only. To add an ACL interface to the switch:
1. Select Security > ACLs from the main menu tree.
2. Click on the Attach-L2/L3 tab.
Interface Displays the interface on which the ACL is applied. Available
interfaces include ge1, ge2, ge3, ge4 and VLAN1.
IP ACL Displays an IP ACL attached to the L2 or L3 interface in the inbound
direction.
MAC ACL Displays the MAC ACL attached to the L2 interface in the inbound
direction.