Installation guide

Switch Security
6-32
2. Click the Statistics tab.
3. Refer to the following information as displayed within the Statistics tab:
4. Select an interface and click the Delete button to delete the ACL interface from the switch.
5. Click the Export to export the selected ACL attribute to a user specified location.
Interface
Displays the ge1, ge2, ge3, ge 4 or VLAN 1 interface used to add
the ACL association to the switch. As additional VLANs are added
beyond the default VLAN1, they too become available.
Action Displays the permit, deny or mark designation for the ACL. If the
action is to mark, the packet is tagged for priority or “type of
service.”
Protocol Displays the protocol used with the ACL. Available options include
icmp, ip, tcp and udp.
Low Source IP Displays the Low Source IP Address from where the packets are
sourced.
High Source IP Displays the High Source (highest address in available range)
IP Address from where the packets are sourced.
Low Destination IP Displays the Low Destination (lowest address in available range)
IP Address.
High Destination IP Displays the High Destination IP Address.
Packets In Displays the number of packets (in bytes) transmitted over the ACL.
Packets Out Displays the number of instances this ACL has been used.
Periodically review to determine whether specific ACLs should be
deleted or modified to make relevant.