RS309 Scanner Quick Reference Guide
RS309 Scanner © 2007 MOTOROLA, INC. All rights reserved. Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
Quick Reference Guide 3 Introduction The RS309 is a modular, wearable laser scanner that provides the operator with unencumbered bar code scanning capability. The RS309 is used with the WT4070/90 wearable terminal. The operator wears the RS309 on the back of the hand and uses a thumb-activated trigger to operate the scanner. An interface cable connects the RS309 to the wearable terminal. Power for the RS309 is provided by the wearable terminal.
RS309 Scanner Installation The RS309 connects to the wearable terminal and mounts on the back of the hand using the RS309 Glove. 1. Connect the RS309 trigger cable to the back of the RS309. Trigger Connector NOTE There are two interface cables available. The standard interface cable connects the RS309 to a wearable terminal mounted on the arm. The extended length interface cable connect the RS309 to a wearable terminal mounted on the hip. 2. Connect the RS309 interface cable to the back of the RS309.
Quick Reference Guide 5 4. Connect the other end of the RS309 interface cable to the wearable terminal cable connector. If the wearable terminal is mounted on the arm, connect the cable to the cable connector closest to the wrist. Interface Cable Cable Connector 5. Mount the RS309 on the RS309 Glove. Refer to the RS309 Glove Installation Guide for information on mounting the RS309. 6. Slide the trigger strap on the index finger, with the button positioned next to the thumb, and adjust the strap. 7.
RS309 Scanner Using the Scanner To scan bar codes: 1. Turn on the wearable terminal. 2. Launch a scanning application. 3. Press the scan trigger and aim the RS309 at a bar code. The LED turns red to indicate the RS309 is on. 4. Adjust the aim so that the thin, red laser beam covers the entire length of the bar code. Right 012345 Wrong 012345 5. If the decode is successful the LED turns green. The terminal beeps if programed accordingly.
Quick Reference Guide 7 RS309 Freezer Version NOTE The RS309 Freezer version is shipped with desiccant packs in a sealed plastic bag. Be sure to insert the packs provided before using the scanner. The RS309 Freezer version provides unencumbered bar code scanning capability in cold environments. Two desiccant packs must be inserted inside the scanner to prevent condensation in the exit window. These packs require replacement; how frequently depends on your environment.
RS309 Scanner 6. To replace the access cover, align the knobs on the cover with the notches inside the desiccant well, and turn the cover clockwise 45° using the coin. Replacing the Protective Cap To replace the protective cap that covers the RS309: 1. Remove all cables connected to the RS309 and remove the RS309 from any mounting equipment. 2. Push up on the recesses between the protective cap and the scanner (located underneath the exit window) until the tabs on the scanner pop out.
Quick Reference Guide 9 Cleaning Wipe the exit window periodically with a lens tissue or other material suitable for cleaning optical material, such as eyeglasses. CAUTION Do not pour, spray, or spill any liquid on the scanner. Troubleshooting Symptom Laser beam does not display when pressing the trigger. RS309 does not decode a bar code. Probable Cause Action Interface cable is not secure. Verify that the interface cable connections are connected properly. Power is not applied to RS309.
RS309 Scanner Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
Quick Reference Guide 11 Regulatory Information This device is approved under the Symbol Technologies brand; Symbol Technologies, Inc., is the Enterprise Mobility business of Motorola, Inc. (“Motorola”). All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Regulatory Information is available in French, Italian, German, Spanish (Spain), Portuguese, Japanese, Korean, Russian and Simplified Chinese.
RS309 Scanner Scanner Labeling CAUTION LASERLICHT - NICHT IN DEN STRAHL BLICKEN! LASER KLASSE 2 LUMIÈRE LASER-NE PAS REGARDER DANS LE FAISCEAU APPARIEL À LASER DE CLASSE 2. CAUTION-LASER LIGHT. DO NOT STARE ITO BEAM. IEC CLASS 2 LASER PRODUCT 630-680nM, 1.0 mW LASER LASER LIGHT-DO NOT STARE INTO BEAM 630-680nm LASER 1.
Quick Reference Guide 13 Protective Housing (Cap) Labeling er r Bar Lase Code Scann THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, 9B97 US C CAUTION Listed sory Acces SEE QUICK REFERENCE MANUAL FOR PATENT COVERAGE AND LISTING . I.T.E LASER LIGHT-DO NOT STARE INTO BEAM 630-680nm LASER 1.
RS309 Scanner Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Marking and European Economic Area (EEA) Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC.
Quick Reference Guide 15 Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Motorola pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.symbol.com/environmental_compliance. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Motorola al fine di consentirne il riciclaggio.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Motorola-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.symbol.com/environmental_compliance. Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Motorola för återvinning. Information om hur du returnerar produkten finns på http://www.symbol.com/environmental_compliance.
