user manual

ManualsBrandsMotorola ManualsSatellite TV SystemSatellite TV System DSR 550

DSR 550 Satellite Receiver

Download Installation Manual

To Be Used with Initial Production Units ONLY

Note: Screen content displayed in this manual will vary. This

depicts a beta version of the firmware, and does not represent

the final look and feel of the product.

22 October 2003

Proprietary Information

All information contained in this document is confidential and proprietary to Motorola, Inc. Broadband Communications Sector. No license, expressed or implied,

under any patent, copyright or trade secret right is granted or implied by the conveyance of this document. No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical,

chemical, manual, or otherwise without the prior written permission of Motorola, Inc. Broadband Communications Sector. (See Document Security Standard,

320190-000 for details.)

MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. All othe

roduct or service names are the property of their respective owners.

Summary of content (4 pages)

PAGE 1
DSR 550 Satellite Receiver Download Installation Manual To Be Used with Initial Production Units ONLY Note: Screen content displayed in this manual will vary. This depicts a beta version of the firmware, and does not represent the final look and feel of the product. 22 October 2003 Proprietary Information All information contained in this document is confidential and proprietary to Motorola, Inc. Broadband Communications Sector.
PAGE 2
This Motorola document is intended to assist an installer on installation, download, and activation process for the DSR550 satellite receiver set-top box (STB). Please record the STB unit address (UA) located on the label on the rear panel of the STB. It is in the format: 000-XXXXX-XXXXX-XXX. This is required for authorization later in the process.
PAGE 3
verify that your signal strength is at an acceptable level by pressing option 2. Installer Setup, then option 1. Tune Satellite Signal. The Signal Level Number should be about 30. The signal strength meter bar should be green as well. Press the back key on the RCU to get back to the Setup Options screen. View Status Screen The STB is now ready to be authorized. Please pull up the following screen to monitor the authorization process.
PAGE 4
Download Operation After the front panel amber “light pipes” have been blinking for about 1 minute, pull the plug and power cycle the STB. The “Download In Progress” screen will automatically appear on the channel ¾ or the Composite Input on the TV. The download screen is not visible on the Component Input on the TV. The row that starts with DL: shows how far along the download is. The last number in that row will count down to zero (0) as the download files are received.