user manual

7 SBG900 User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Rear Panel
The rear panel provides cabling connectors, status lights, and the power receptacle:
Key Item Description
1
•
If you experience a problem, you can push this recessed button to restart the SBG900 (see
“Troubleshooting”). To reset all values to their defaults, hold down the button for more than five
seconds
. Resetting may take 5 to 30 minutes because the SBG900 must find and lock on the
appropriate communications channels.
2 Use the
ETHERNET port to connect an Ethernet LAN cable with RJ-45 connectors to an
Ethernet-equipped computer, hub, bridge, or switch.
3 For Windows
only , use the USB port for Connecting a PC to the USB Port. You cannot connect the
SBG900 USB port to a Macintosh or UNIX computer.
4 The
CABLE port provides a connection to the coaxial cable outlet.
5 The +12
VDC power connector to the external power supply.
1
2
4
5
3