Installation manual

B-18 Event Log Messages
SURFboard Cable Modem Installation Manual
Code Event Log Messages Level Cable Modem Actions
F510.30
Bridge Api. Set IP Spoof Max failed to
retrieve set status from pipe.
2 (Alert) The CM experienced a problem
using a pipe. This is serious.
Contact your vendor.
F510.31
Bridge Api. Failed to Add IP Spoof Entry.
Semaphore take failed.
2 (Alert) The CM experienced a problem
using a semaphore. This is serious.
Contact your vendor.
F510.32
Bridge Api. Failed to Add IP Spoof Entry.
Failed to open filter pipe.
2 (Alert) The CM experienced a problem
using a pipe. This is serious.
Contact your vendor.
F510.33
Bridge Api. Add IP Spoof Entry failed to
retrieve add status from pipe.
2 (Alert) The CM experienced a problem
using a pipe. This is serious.
Contact your vendor.
F510.34
Bridge Api. Failed to Del IP Spoof Entry.
Semaphore take failed.
2 (Alert) The CM experienced a problem
using a semaphore. This is serious.
Contact your vendor.
F510.35
Bridge Api. Failed to Delete IP Spoof
Entry. Failed open filter pipe.
2 (Alert) The CM experienced a problem
using a pipe. This is serious.
Contact your vendor
F510.36
Bridge Api. Delete IP Spoof Entry. Failed
to retrieve del status from pipe.
2 (Alert) The CM experienced a problem
using a pipe. This is serious.
Contact your vendor
F510.37
Bridge Api. Failed to Get IP Spoof
Entries. Semaphore take failed.
2 (Alert) The CM experienced a problem
using a semaphore. This is serious.
Contact your vendor.
F510.38
Bridge Api. Failed to Get IP Spoof
Entries. Failed open filter pipe.
2 (Alert) The CM experienced a problem
using a pipe. This is serious.
Contact your vendor
F510.39
Bridge Api. Get IP Spoof Entries. Failed
to retrieve get status from pipe.
2 (Alert) The CM experienced a problem
using a pipe. This is serious.
Contact your vendor
F510.40
Bridge Api. Failed to Set IP Default
Action. Semaphore take failed
2 ( Alert ) SNMP tried to change the value of
docsDevFilterIPDefault. Action failed
because system was not able to get
necessary semaphore. This is
serious. Contact your vendor
F510.41
Bridge Api. Failed Set IP Default Action.
Failed to open filter pipe
2 ( Alert ) SNMP tried to change the value of
docsDevFilterIPDefault. Action failed
because system was not able to
open a necessary pipe. This is
serious. Contact your vendor
F510.42
Bridge Api. Set IP Default Action failed to
retrieve pipe status
2 ( Alert ) SNMP tried to change the value of
docsDevFilterIPDefault. Action failed
because system was not able to
write to a necessary pipe. This is
serious. Contact your vendor