User Guide

78
SBG900 User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Setting Up a USB Driver
The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG900.
Perform one of the following procedures based on your Windows version:
Setting Up a USB Driver in Windows 98
Setting Up a USB Driver in Windows 2000
Setting Up a USB Driver in Windows Me
Setting Up a USB Driver in Windows XP
The SBG900 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect
through Ethernet
only
.
If you have a problem setting up the USB driver, remove it by performing
one
of the following procedures:
Removing the USB Driver from Windows 98 or Windows Me
Removing the USB Driver from Windows 2000
Removing the USB Driver from Windows XP
Caution!
Be sure the Motorola SURFboard Wireless Cable Modem Gateway CD-ROM is inserted in the
CD-ROM drive before you plug in the USB cable.