User Guide

SBG900 User Guide 87
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
8 Select The updated driver... and click Next. If the following window is not displayed, verify that the SBG900
Installation CD-ROM is properly inserted in the CD-ROM drive. If you still cannot find the correct driver file,
click Cancel to cancel the installation and perform the procedure for “Removing the USB Driver from
Windows 98 Second Edition or Windows Me”. Then repeat this procedure.
9 After the window shown under step 8 is displayed, click Next.
If a window with the message Copying Files... displays and asks for the CD-ROM drive, type the CD-ROM
drive letter (for example, “D:”) and click OK.
If an Insert Disk window similar to the one below is displayed, Windows 98 Second Edition system files are
needed to complete the installation. To install the files, insert your Windows 98 Second Edition CD-ROM in
the CD-ROM drive and click OK.
After all the necessary files are loaded, the following window is displayed to confirm a successful installation:
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.