Specifications

35
Using Memory
Entering Names
When the display shows Alpha or Press STO, you can use the keypad
to produce any letter in the alphabet. Press a key to scroll
through the letters printed on the key and use the volume keys to
switch between upper and lowercase. For example, press
¤ to
enter the letters “A,” “B,” or “C” as shown:
To enter a name into the Phone Book:
To enter punctuation:
Using this chart as a guide, press ⁄ to scroll through the
available punctuation marks:
*Note: The display holds 2 lines of 12 characters, but the last
three on each line are reserved for memory location information.
1.
Enter
Letter
Press a key as many times as necessary to enter
a letter. The next letter on the key will appear
with each press.
Toggle
Case
Press
” or ’ to change between upper and
lowercase. The next letter you enter will
reflect the change.
2.
Advance
Cursor
After each letter, press » to advance the
cursor to the next space.
Clear
Letter
Press
Ç or « to erase a letter if you
make a mistake.
3.
Finish
Storing
Enter up to 18 letters
*
. Press ¬ when you
are finished. Your phone will confirm the entry
by displaying the information stored.
press 1 time to insert an "A"
press 2 times to insert a "B"
press 3 times to insert a "C"
press 4 times to insert a "2"
(space)