Quick Start Guide

QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your Wi-Fi
®
Pet Video Camera
MODEL:
SCOUT66
WARNING:
STRANGULATION HAZARD – In case this unit is being used to monitor infants or children, keep the unit and adapter cord more than 3 feet from the crib and
out their reach.
Never place camera or cords within a crib or near a bed. Secure the cord away from children’s reach. Never use extension cords with AC Adapters. Only
use the AC Adapters provided.
As with any electrical device, supervision of your pet’s usage should be exercised until your pet is acclimated to the product. If your pet is prone to chewing,
we strongly recommend you keep this and all other electrical devices out of its reach.
1. Insert the power adapter plug into the micro USB socket at the back of
Camera unit.
2. Connect the other end of the power adapter to a suitable electrical
outlet.
3. Switch the button to ON position. The colored LED will start flashing
slowly after two Beep tones, indicating that the camera is ready for setup.
4. Give enough space around the temperature sensor.
A. Connect to the power supply.
Power adapter plug
Switch to turn ON
the camera
Download the Hubble for Motorola Monitors App from the App Store for iOS
devices or from the Google Play
TM
Store for Android
TM
devices.
B. Install the Hubble for Motorola Monitors App.