User Guide
Table Of Contents
- Welcome
- Getting Started
- Setting Up
- Using Your SD4501
- Making a Call from the Handset or BaseUnit
- Answering/Ending a Call
- Adjusting the Volume During a Call
- Making a Call Using the Speakerphone
- Switching Between the Handset and Speakerphone
- Muting a Call
- Placing a Call on Hold
- Redialing a Number
- Finding a Lost or Misplaced Handset
- Saving a Number in the Phonebook
- Advanced Features
- Warranty
3
Getting Started
Setting Up the Charging Base
Your expansion handset does not require a phone line,
just charge the battery, and register it to the base. To set
up your Motorola Expansion Handset:
1 Plug the power cord into the back of the
charging base.
2 Plug the power cord into an electric outlet.
Charging the Handsets
Place the handset in the charging base. The LED is solid
red when the handset is charging.
Note: The initial battery charging time for your new
handset is at least 12 hours.
Charge LED
SD4501 BW Handset.book Page 3 Tuesday, January 25, 2005 7:43 PM