Personal Computer User Manual

Installation

http://www.motorola.com/computer/literature 1-15

4. Remove four screws (Phillips type) from the standoffs in each

corner of the primary PCI expansion module.

5. Attach the four standoffs from the PMCspan-010 mounting kit to

the PMCspan-002 by screwing the threaded male portion of the

standoffs in the locations where the screws were removed in the

previous step.

6. Place the PMCspan-010 on top of the PMCspan-002. Align the

mounting holes in each corner to the standoffs and align

PMCspan-010 connector P3 with PMCspan-002 connector J3.

Figure 1-5. PMCspan-010 Installation on a PMCspan-002/MVME5100

2065 9708

PMCspan-010

MVME5100 and

MCspan-002

ssembly