Personal Computer User Manual

Default Settings

http://www.motorola.com/computer/literature 3-11

Primary SCSI Data Bus Width [W/N] = N?

Secondary SCSI identifier = 07?

Select the identifier. (Default = 07.)

NVRAM Bootlist (GEV.fw-boot-path) Boot Enable [Y/N] = N?

Note When enabled, the GEV boot takes priority over all other boots,

including Autoboot and Network Boot.

NVRAM Bootlist (GEV.fw-boot-path) Boot at power-up only [Y/N] = N?

NVRAM Bootlist (GEV.fw-boot-path) Boot Abort Delay = 5?

The time (in seconds) that a boot from the NVRAM boot list will delay

before starting the boot. The purpose for the delay is to allow you the

option of stopping the boot by use of the

BREAK key. The time value is

from 0-255 seconds. (Default = 5 seconds)

Auto Boot Enable [Y/N] = N?

W Wide SCSI (16-bit bus).

N Narrow SCSI (8-bit bus). (Default)

Y Give boot priority to devices defined in the fw-boot-

path global environment variable (GEV).

N Do not give boot priority to devices listed in the fw-

boot-path GEV. (Default)

Y Give boot priority to devices defined in the fw-boot-

path GEV at powerup reset only.

N Give powerup boot priority to devices listed in the fw-

boot-path GEV at any reset. (Default)

Y The Autoboot function is enabled.

N The Autoboot function is disabled. (Default)