Personal Computer User Manual

Default Settings
http://www.motorola.com/computer/literature 3-13
3
Auto Boot Abort Delay = 7?
The time in seconds that the Autoboot sequence will delay before
starting the boot. The purpose for the delay is to allow you the option
of stopping the boot by use of the
BREAK key. The time value is from
0-255 seconds. (Default = 7 seconds)
Auto Boot Default String [NULL for an empty string] = ?
You may specify a string (filename) which is passed on to the code
being booted. The maximum length of this string is 16 characters.
(Default = null string)
ROM Boot Enable [Y/N] = N?
ROM Boot at power-up only [Y/N] = Y?
ROM Boot Enable search of VMEbus [Y/N] = N?
ROM Boot Abort Delay = 5?
The time (in seconds) that the ROMboot sequence will delay before
starting the boot. The purpose for the delay is to allow you the option of
stopping the boot by use of the
BREAK key. The time value is from 0-255
seconds. (Default = 5 seconds)
ROM Boot Direct Starting Address = FFF00000?
The first location tested when PPCBug searches for a ROMboot module.
(Default = 0xFFF00000)
Y The ROMboot function is enabled.
N The ROMboot function is disabled. (Default)
Y ROMboot is attempted at power-up only. (Default)
N ROMboot is attempted at any reset.
Y VMEbus address space, in addition to the usual areas
of memory, will be searched for a ROMboot module.
N VMEbus address space will not be accessed by
ROMboot. (Default)