Installation guide

35
Appendix A
Technical Specifications
The M-eMTA has the following technical specifications. Note that these specifications are subject
to change without notice.
General Specifications
Cable Interface F–connector, female, 75 Ω
Network Interface 10/100 Ethernet
Data Protocol TCP/IP
Dimensions (6–slot chassis) 22”H x 10.5”D x 12”W
Weight (6–slot chassis) Approximately 24 pounds (Approximately 36 pounds if fully popu-
lated.)
Mounting Wall mountable
Window Break-resistant, allows quick and easy viewing of eMTA module
and power supply LEDs without opening chassis door.
Power
Power
*
*. The maximum SBV5506 Input power is 80W, which is for a 24-line operation and a 20REN maximum ring load.
4W (nominal) per card
Input North America—90 VAC (HFC Power) + 12 VDC (UPS Power)
Environment
Operating Temperature –40° C to +60° C
(–40° F to +140° F)
Storage Temperature –40° C to +70° C
(–40° F to +158° F)
Relative Humidity 0 to 95% R.H. (non-condensing)
Thermal Management Passive Thermal Management (no fans or moving parts)