Specifications

13 - 12 Symbol DS3478 Product Reference Guide
User-Programmable Supplementals
If you selected a Supplemental User-Programmable option from Decode UPC/EAN Supplementals on page 13-9,
select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric
bar codes beginning on page D-1. Select User-Programmable Supplemental 2 to set a second 3-digit prefix.
Then select the 3 digits using the numeric bar codes beginning on page D-1.
UPC/EAN Supplemental Redundancy
If you selected Autodiscriminate UPC/EAN Supplementals, use this option to adjust the number of times to
decode a symbol without supplementals before transmission. The range is from two to 30 times. 14 or above is
recommended when decoding a mix of UPC/EAN symbols with and without supplementals. The default is 10.
To set a decode redundancy value, scan the following bar code. Next, scan two numeric bar codes from Appendix
D, Numeric Bar Codes. Use a leading zero for single digit numbers. In case of an error, or to change the selection,
scan Cancel on page D-3.
User-Programmable Supplemental 1
User-Programmable Supplemental 2
UPC/EAN Supplemental Redundancy