Specifications

Advanced Data Formatting 12 - 3
Rule 1: The Code 128 Scanning Rule
Step Bar Code On Page Beep Indication
1 Begin New Rule 12-8 High High
2 Code 128 12-11 High High
3 Send next 5 characters 12-29 High High
4 Send <CTRL M> 12-51 High High
5 Send next 5 characters 12-29 High High
6 Send <CTRL P> 12-51 High High
7 Send next 2 characters 12-28 High High
8 Send <CTRL D> 12-50 High High
9 Save Rule 12-8 High Low High Low
Rule 2: The UPC Scanning Rule
Step Bar Code On Page Beep Indication
1 Begin New Rule 12-8 High High
2 UPC/EAN 12-12 High High
3 Send all remaining data 12-28 High High
4 Send <CTRL M> 12-51 High High
5 Save Rule 12-8 High Low High Low
To correct any errors made while entering this rule, scan Quit Entering Rules on page 12-9. If you already saved
the rule, scan Erase Previously Saved Rule on page 12-9.
Alternate Rule Sets
Group ADF rules into one of four alternate sets which you can turn on and off when needed. This is useful to format
the same message in different ways. For example, a Code 128 bar code contains the following information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
This bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily, data transmits as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)
But, when there is a sale, send only the following:
24 (class key)
56712437 (stock key)