Scanner User Manual

Quick Reference Guide 17
Scanner
does not
function.
Accidentally
scanned Host
Trigger, Level
Trigger, or Pulse
Trigger from
Triggering Options
on page 8.
Symbol MSXX04 Non-Imager
Models:
Download the SSI Demonstration
Utility for MiniScan from
http://www.motorola.com/enterpri
semobility/contactsupport. Use
the utility to change the Trigger
Mode parameter 138 (8Ah) to the
value 04h (Continuous Mode) via
SSI.
Alternatively, use the utility's soft
trigger button to activate the
scanner, and scan the
Continuous option of the
Trigger Mode parameter.
Symbol MSXX07 Non-Imager
Models:
Cycle power to the scanner. As
the laser briefly appears after
power up, scan Continuous on
page 9.
All Models:
Connect an interface cable which
has an external trigger jack, a
push button trigger cable, and a
power supply to the scanner. You
can purchase these cables from
Motorola, or make a similar one
using the scanner’s pinouts as a
reference. See your Symbol
MiniScan model’s Integration
Guide for pinouts.
Using a momentary switch, short
the scanner’s trigger line to
ground to activate the laser, then
scan Continuous on page 9.
Problem
Possible
Cause
Possible Solutions