Symbol MiniScan Family of Scanners Quick Reference Guide
Symbol MiniScan Family of Scanners © 2010 MOTOROLA, INC. All rights reserved. Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
Quick Reference Guide 3 Introduction The new Symbol MiniScan family is the next generation of industrial fixed scanners. The scanners provide the quickest, easiest and most flexible integration of bar code scanning into all types of devices. The Symbol MiniScan family offers high performance scan engines, along with a housing, exit window, decoder and variety of interfaces (including USB) in a compact durable housing.
Symbol MiniScan Family of Scanners • Symbol MS120xFZY The Symbol MS120xFZY incorporates fuzzy logic for premium scanning performance on all types of 1-D and RSS bar codes including poorly printed and low contrast. • Symbol MS120xWA The Symbol MS120xWA features a broad 60° scan angle to accommodate large 1-D and RSS bar codes within an extremely close range. • Symbol MS954 The Symbol MS954, packaged in the smaller MiniScan enclosure, offers customers easier integration into tight areas.
Quick Reference Guide Accessories • For data connection: NOTE Only Symbol MiniScan scanner models ending in ‘07’ (e.g., Symbol MSxx07) can communicate over USB.
Symbol MiniScan Family of Scanners - • Low Profile DB9 USB Cable (18 in. straight); without trigger jack; without beeper, p/n 25-58926-02R. Other: - Fixed mount stand, p/n 20-60136-01R - Simple Serial Interface Software Developer's Kit (SSISDK). To download an SSISDK, go to: http://www.motorola.com/enterprisemobility/support Connecting the Symbol MiniScan The Symbol MiniScan can be triggered either by a software trigger command, or by an external switch.
Quick Reference Guide 7 6. Program the Symbol MiniScan. Triggering option bar codes begin on page 8. Refer to the Symbol MiniScan Integration Guide for more information on selecting specific parameters. Scanning 1. Ensure all connections are secure. 2. Once power is applied to the Symbol MiniScan scanner the LED lights a continuous red. 3. Ensure the bar code is within scanning range. Align the bar code and trigger the unit. 4. Upon successful decode, the scanner LED turns green.
Symbol MiniScan Family of Scanners Triggering Options Level Trigger The laser is enabled and decode processing begins when the trigger line is activated. Decode processing continues until a good decode occurs, the trigger is released, or the Laser-On time expires. The laser is disabled once decode processing is complete. The next decode attempt does not occur until the trigger line is released and then reactivated.
Quick Reference Guide 9 Continuous The laser is enabled continuously and decode processing is continuously active. In this mode, the scanner can be configured to scan and transmit a bar code and then not decode the same bar code for a set period of time (Time Between Same Bar Code) and not decode ANY bar code for a period of time (Time Between Different Bar Codes). This allows the user to tailor the application to the rate at which bar codes are presented.
Symbol MiniScan Family of Scanners Beeper Indications The beeper indicates the scanner status as follows: Beeper 3 Beeps Indication Power up (or reset) occurred. (Symbol MS220x and MS320x models only.) 1 Beep A bar code is successfully decoded. 4 Beeps Transmission error. Bar code data was not received by the host. Fast warble A programming parameter was entered successfully. LED Indicators LED Indication Red Scanner is on. Green A bar code is successfully decoded.
Quick Reference Guide 11 rotation, eliminating the need to orient the bar code in the field of view. Semi-omnidirectional Scan Pattern (Symbol MS220x, MS320x) The semi-omnidirectional pattern is an alternative to the full omnidirectional pattern, that scans highly truncated 1-D and RSS bar codes. The bar code must be presented horizontally with no more than a 20o tilt.
Symbol MiniScan Family of Scanners High Density Single Scan Line (Symbol MS220x, MS320x) The single scan line appears as a "mini" raster and scans multiple areas of 1-D bar codes to swiftly and accurately capture data on poorly printed and damaged bar codes. The single line is ideal for 1-D bar codes. Always Raster Pattern (Symbol MS220x, MS320x) The Symbol MS220x and MS320x can create an adjustable raster pattern of a programmed height. This pattern is best for PDF417 environments.
Quick Reference Guide 13 True Single Scan Line (Symbol MS120x, MS954) The Symbol MS120x and MS954 are 1-D scanners and emit a single scan line. Bar Codes Following are some frequently used bar codes for some of the Symbol MiniScan scanners. NOTE The bar codes that follow are not supported by all Symbol MiniScan scanners. See the section Laser Patterns beginning on page 10 for more information.
Symbol MiniScan Family of Scanners Bar Codes (continued) Always Raster Semi-omnidirectional Pattern
Quick Reference Guide 15 Bar Codes (continued) Slab Pattern Troubleshooting Problem Possible Cause No red LED No power to the or nothing scanner. happens when you attempt to scan. Scanner cannot read the bar code. Possible Solutions Check the system power. Confirm that the correct host interface cable is used. Power supply not plugged in. Check for loose cable connections. Interface/power Check for loose cable cables are loose. connections. Scanner is not programmed for the correct bar code type.
Problem Symbol MiniScan Family of Scanners Possible Cause Possible Solutions Bar code symbol Scanner cannot read is unreadable. the bar code (continued) Inappropriately hot environment. Check the symbol to ensure it is not defaced. Try scanning similar symbols of the same code type. Beeper is Laser configured. activates, followed by a beep sequence. See Beeper Indications for beeper indication descriptions. Remove the scanner from the hot environment and allow it to cool down.
Quick Reference Guide Problem Scanner does not function. Possible Cause Accidentally scanned Host Trigger, Level Trigger, or Pulse Trigger from Triggering Options on page 8. 17 Possible Solutions Symbol MSXX04 Non-Imager Models: Download the SSI Demonstration Utility for MiniScan from http://www.motorola.com/enterpri semobility/contactsupport. Use the utility to change the Trigger Mode parameter 138 (8Ah) to the value 04h (Continuous Mode) via SSI.
Symbol MiniScan Family of Scanners Regulatory Information This device is approved under the Symbol Technologies brand; Symbol Technologies, Inc., is the Enterprise Mobility business of Motorola, Inc. (“Motorola”). All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
Quick Reference Guide 19 Scanner Labeling Power Supply Use ONLY a LISTED Motorola, Type no. 50-14000 (5Vdc/ 850mA) , or PWRS-14000 (5Vdc/ 850mA), Direct Plug-In Power supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of Alternative Power Supply will invalidate any approvals given to this unit and may be dangerous.
Symbol MiniScan Family of Scanners In accordance with IEC60825-1 and EN60825, the following information is provided to the user: ENGLISH CLASS 1 CLASS 2 DANISH / DANSK KLASSE 1 KLASSE 2 HEBREW CLASS 1 LASER PRODUCT LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT KLASSE 1 LASERPRODUKT LASERLYF SE IKKE IND I STRÅLEN KLASSE 2 LASERPRODUKT ITALIAN / ITALIANO CLASSE 1 PRODOTTO AL LASER DI CLASSE 1 CLASSE 2 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 DUTCH / NEDERLANDS KLASSE
Quick Reference Guide 21 Radio Frequency Interference Requirements Note: This equipment has been tested and found to comply with the limits for a Class B digital FOR HOME OR OFFICE USE device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Symbol MiniScan Family of Scanners Waste Electrical and Electronic Equipment (WEEE) Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Motorola за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: http://www.motorola.com/recycling/weee. Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Motorola k recyklaci.
Quick Reference Guide 23 Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Motorola vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://www.motorola.com/recycling/weee weboldalra. Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Motorola għar-riċiklaġġ.
Service Information If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact Motorola Enterprise Mobility Support at: http://www.motorola.com/enterprisemobility/contactsupport. For the latest version of this guide go to: http://www.motorola.com/enterprisemobility/manuals. Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.