Digital Cordless Telephone Motorola T1 Models: T101, T102, T103 and T104 Warning: Charge the handset for 24 hours before use.
Welcome... to your new Motorola T1 Digital Cordless Telephone! • All handsets are fully cordless for locating anywhere within range. • 50 Name and Number phonebook. • Bright backlit display. • Speakerphone for hands-free conversations. • Caller ID shows you who’s calling and see details of the last 20 callers in a Calls list.1 • Redial up to 10 of the last numbers called. • Register up to 4 handsets to a single base. • Make internal calls and transfer external calls between handsets.
This user guide provides you with all the information you need to get the most from your phone. To set up your phone, follow the simple instructions in ‘Getting Started’, on the next few pages. IMPORTANT Only use the telephone line cord supplied.
1. Getting started......................................................................6 2. Getting to know your phone...............................................10 3. Using the phone..................................................................15 3.1 Switch the handset on / off.............................................................................15 3.2 Calls................................................................................................................15 3.2.
6. Clock & alarm......................................................................23 6.1 Set the date and time.....................................................................................23 6.2 Set the alarm...................................................................................................23 6.3 Switch off alarm ring.......................................................................................23 7. Personal settings................................................
1. Getting started IMPORTANT Do not place your T1 in the bathroom or other humid areas. Location You need to place your T1 base within 1.5 metres of the mains power and telephone wall socket so that the cables will reach. The socket-outlet should be installed near the equipment and should be easily accessible. Make sure that it is at least 1 metre away from other electrical appliances to avoid interference. Your T1 works by sending radio signals between the handset and base.
Connecting the base 1. Plug the telephone line cord into the socket marked on the underside of the base. 2. Plug the power adaptor into the socket marked on the underside of the base and plug the other end into the mains power wall socket. Switch on the mains power. Installing and charging the handset 1. Remove the battery cover from the back of the handset and insert the rechargeable Ni-MH battery cells supplied.
4. When the handset is fully charged, the icon will appear steady on the display. Plug the other end of the telephone line cord (make sure that one end is already plugged into the base) into the telephone wall socket. Connecting the handset and charger (for multi-pack only) If you have purchased a multiple pack, you will need to carry out this process for all the handsets and chargers. 1.
When charging, the icon will scroll on the display. Once charged scrolling will stop. BATTERY PERFORMANCE In ideal conditions, fully charged batteries should give up to 10 hours talk time or up to 200 hours standby time on a single charge.1 Note that new batteries do not reach their full capacity until they have been put to normal use for several days. To keep your batteries in the best condition, leave the handset off the base for a few hours at a time.
2. Getting to know your phone Overview of your handset A B C D E I J K L F G M H N A Earpiece B Display See page 12 for an overview of the display icons. C Up During a call, press to increase earpiece volume. When the phone is ringing, press to increase the handset ringer volume. Press to scroll through the menu options, redial list, calls list and phonebook entries. D Menu / OK / Mute Press to open the Menu. Press to select menu options and to confirm a displayed option.
E Talk / Hands-free Press to switch hands-free on or off during a call. Press to make and receive calls. F * / Keypad lock / Pulse to Tone dialling Dial a *. Press and hold to lock and unlock the keypad. Press to switch from pulse dialling to tone dialling. G Recall Use with switchboard / PABX services and some network services. When on an external call, press to access a Call Waiting Line when you hear the call waiting prompt signal. Press again to toggle between the two calls.
Handset LCD Display Battery status Scrolls when charging Time or Handset name In standby mode, press and hold m to switch handset idle screen between handset name or time.
Battery is running low Flashes when battery is almost fully discharged 1For this feature to work, you must subscribe to Caller ID Service from your network operator. A subscription fee may be payable. 2This feature is dependent on your Network Service provider supporting the service. A subscription fee may be payable. Underside of the base A A Page In standby mode, press to ring the handset(s). Press and hold to enter registration mode when registering handsets.
Menu map PHONEBOOK PERSONAL SET ADVANCED SET VIEW HANDSET TONE ECO MODE ADD NEW RING VOLUME ECO PLUS EDIT RING MELODY AUTO PREFIX DELETE1 KEY TONE RECALL TIME DELETE ALL1 HANDSET NAME DIAL MODE CLOCK/ALARM AUTO ANSWER CHANGE PIN DATE & TIME LANGUAGE REGISTER SET ALARM UNREGISTER RESET 1Only available if a phonebook entry is stored.
3. Using the phone NOTE The handset will automatically time the duration of all external calls. The call timer will display after the first 10 seconds of the call. When the call ends, the total duration of the talk time stays on the display for 3 seconds. 3.1 Switch the handset on / off Press and hold e to switch the handset on or off. 3.2 Calls 3.2.1 Make a call 1. Press t. 2. Dial the number. 3.2.2 Preparatory dialling 1. Dial the number first.
1. If only 2 handsets are registered to the base, press I and the other handset rings automatically. 2. If more than 2 handsets are registered to the base press I and scroll handset that is to be called then press t. d to the 3.5.2 Receive an internal call When you receive an internal call, the icon flashes and the handset number that is calling you is displayed. 1. Press t to answer the call. 3.5.3 Transfer a call You can transfer an external call to another handset registered to the base.
2. Press t to switch the call between the earpiece and the loudspeaker. 3. Press e to end the call. NOTE During a hands-free call, press u or d to adjust the volume. 3.6.2 Answer a call hands-free 1. When the phone rings, press t twice to answer the call. 3.6.3 Switch to hands-free during a call. 1. During a call, press t to put the call on the loudspeaker. 2. To switch hands-free off and return the call to the earpiece, press t again. 3.
3.7.4 Delete the entire Redial list 1. Press r to open the Redial list. 2. Press m and scroll d to DELETE ALL. 3. Press m, the display shows CONFIRM?. 4. Press m to confirm or P to cancel. 3.8 Lock / unlock the keypad You can lock the keypad so that it cannot be operated accidentally while carrying it around. NOTE When the keypad is locked, you can still answer incoming calls and operate the handset as normal during the call. When the call ends, the keypad lock comes on again. 1. Press and hold *.
4. Phonebook You can store up to 50 names and numbers in the phonebook. Names can be up to 12 characters long and numbers up to 24 digits. 4.1 Store a name and number If the T1 is connected to a switchboard, you may need to enter a pause in a stored number. This gives the switchboard time to find an outside line. A pause is normally stored after the switchboard access code (e.g. 9). When storing a number, press and hold # until the display shows P. You can then continue entering the phone number.
4.2 View or dial an entry 1. Press P. The u d icon is displayed. 2. Scroll or to the entry you want. OR Enter the first letter of the name to search alphabetically. The first name that starts with this letter or the nearest letter in the alphabet will be displayed. Scroll or to the entry you want. u d 3. Press t to dial or e to return to standby. NOTE When the name is displayed, you can switch between the name and number by pressing m. 4.3 Edit a name and number 1. Press m.
5. Caller ID and the Calls list IMPORTANT To use Caller ID, you must first subscribe to the service from your network provider. A subscription fee may be payable. To ensure that the caller’s name is displayed, make sure you have stored the full telephone number, including the area code in the phonebook. If the caller’s number is stored in the phonebook, the name assigned to it will be displayed. If the call is a withheld call, PRIVATE will be displayed.
5.2.2 Dial a number in the Calls list 1. Press to open the Calls list. d 2. Scroll u or d to the entry you want. 3. Press t to dial the displayed entry. 5.2.3 Copy a Calls list number to the phonebook d to open the Calls list. u or d to the entry you want. Press m and scroll d to SAVE NUMBER. 1. Press 2. Scroll 3. 4. Press m again. The display shows ENTER NAME. 5. Enter the name and press m. The number is displayed. 6. Edit the number if necessary, then press m to confirm.
6. Clock & alarm If you have subscribed to Caller ID Service, the date and time will be set on all your handsets whenever a call is received. You can also manually set the date and time. NOTE In either case the year has to be manually set. 6.1 Set the date and time 1. Press m, scroll d to CLOCK/ALARM and press m. The display shows DATE & TIME. 2. Press m to select. 3. Enter the date (e.g. 12--08--15 for 12th of August 2015) and press m to confirm. 4. Enter the time using the keypad (e.g.
7. Personal settings 7.1 Handset tones 7.1.1 Handset ringer volume The handset ring volume can be set to different volume levels. Choose from 5 volume levels or Off. 1. Press m, scroll d to PERSONAL SET and press m. 2. The display shows HANDSET TONE, press m. 3. The display shows RING VOLUME, press m . 4. Press u or d to select the volume (1 -5 or OFF) . 5. Press m to confirm or P to return to the previous menu. NOTE When the phone is ringing, you can adjust the ringer volume by pressing u or d. 7.
2. Scroll d to HANDSET NAME and press m. 3. Enter the new handset name and press m to confirm. Delete the current name by pressing P. See ‘ENTERING NAMES’ and ‘WRITING TIPS’ on page 19. 7.3 Auto answer Your phone is set to answer calls by lifting the handset off the base or charger. You can switch this feature off so that calls can only be answered by pressing t. 1. Press m, scroll d to PERSONAL SET and press m. d to AUTO ANSWER and press m. Press u or d to select ON or OFF. 2. Scroll 3. 4.
8. Base settings 8.1 ECO mode Your T1 offers ECO mode function which reduces the transmitted power and energy consumption when switched on. To switch Eco mode on: 1. Press m, scroll d to ADVANCED SET and press m. 2. The display shows ECO MODE and press m. 3. Press u or d to select ON or OFF. 4. Press m to confirm or P to return to the previous menu. NOTE When ECO mode is set to ON, the handset range will be reduced. 8.
8.4 Recall mode This setting is useful to access certain network and PABX/switchboard services. The default recall time is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so. 1. Press m, scroll d to ADVANCED SET and press m. d to RECALL TIME and press m. Press u or d to select SHORT, MEDIUM or LONG and press m to confirm. 2. Scroll 3. NOTE SHORT-100ms, MEDIUM-250ms & LONG-600ms. 8.
NOTE Handset batteries must be fully charged before you start to register. Hold your handset close to the base during the registration process. On the base: 1. Press and hold P for 5 seconds. The base will remain in registration mode for 90 seconds. On the handset: 1. If the handset is not register to a base press m and then enter the 4 digit PIN code (default = 0000) and press m. 2. If the handset is already register to a base press m, scroll press m. 3.
lists. Entries stored in the phonebook will be retained. Other handsets registered to the base will only return to the default time. 1. Press m, scroll 2. Scroll d to ADVANCED SET and press m. d to RESET and press m. 3. The display shows RESET ?. 4. Press m to confirm or P to return to the previous menu. Your T1 will restart automatically. NOTE Once reset the handset will prompt you to reset the date and time, see page 23. 8.
9. Help No dial tone • • • Use only the telephone line cord supplied. Check that the telephone line cord is connected properly. Check that the mains power is connected properly and switched on. No display • Check that the batteries are inserted correctly and fully charged. Use only approved rechargeable batteries supplied. Check that the handset is switched on. Press and hold e. Reset the base by removing the batteries and disconnecting the mains power.
Handset does not ring • The handset ringer volume may be set to Off. Noise interference on my phone or on other electrical equipment nearby • Place your T1 at least one metre away from electrical appliances or any metal obstructions to avoid any risk of interference.
10. General information IMPORTANT This equipment is not designed to make emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in Europe.
Installation Guidelines • • • • Read and understand all instructions and save them for future reference. Follow all warnings and instructions marked on the product. Do not install this product near a bath tub, sink, or shower. Operate this phone using only the power source that is indicated on the marking label. If you are unsure of the power supply to your home, consult with your dealer or local power company. • Do not place this product on an unstable cart, stand, or table.
• Never use household polish as this will damage the product. Never use a dry cloth as this may cause static shock. Environmental • Do not expose to direct sunlight. • The handset may become warm when the batteries are being charged or during prolonged periods of use. This is normal. However, we recommend that to avoid damage, do not place the product on antique / veneered wood.
What will SUNCORP do? SUNCORP or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this limited warranty. We may use functionally equivalent reconditioned / refurbished / pre-owned or new Products, Accessories or parts.
extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola or SUNCORP are excluded from coverage. Use of Non-Motorola branded Products and Accessories.
Declaration of Conformity (DoC) Suncorp declares that the following products: Brandname: Motorola Type: T101, T102, T103 and T104 Descriptions: DECT phone without telephone answering machine (T10x) and their multi-handset versions.
Manufactured, distributed or sold by Suncorp Technologies Ltd., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2015 Motorola Mobility LLC. All rights reserved.
