Operation Manual

26 Base settings
8. Base settings
8.1 ECO mode
Your T1 oers ECO mode function which reduces the transmitted power and energy
consumption when switched on.
To switch Eco mode on:
1. Press m, scroll d to ADVANCED SET and press m.
2. The display shows ECO MODE and press m.
3. Press u or d to select ON or OFF .
4. Press m to conrm or P to return to the previous menu.
NOTE
When ECO mode is set to ON, the handset range will be reduced.
8.2 ECO PLUS
When ECO PLUS is activated and the unit has been idle for 1 minute the transmitted
power between the handset and the base will stop, an incoming call or pressing any key
will activate the unit and it will revert back to the normal mode, until it has been idle again
for 1 minute. This feature is set to OFF by default.
To switch ECO PLUS on:
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to ECO PLUS and press m.
3. Press u or d to select ON or OFF .
4. Press m to conrm or P to return to the previous menu.
8.3 Auto Prefix
You can set the phone to detect a dialling number and replace it with another number. The
number to be detected can be up to 5 digits long. It can be replaced with a number up to
10 digits long.
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to AUTO PREFIX , press m.
3. DIGIT DETECT is displayed. Press m.
4. Enter the number you want to be detected and press m.
5. The display shows PREFIX and press m.
6. Enter the number you want it replaced with.
7. Press m to conrm or e to return to standby.