Operation Manual

7Getting started

Connecting the base

1. Plug the telephone line cord into the socket marked on the underside of the base.

2. Plug the power adaptor into the socket marked on the underside of the base and

plug the other end into the mains power wall socket. Switch on the mains power.

Installing and charging the handset

1. Remove the battery cover from the back of the handset and insert the rechargeable

Ni-MH battery cells supplied. Please note the ’+’ and ’-’ markings inside the battery

compartment and insert in the correct direction.

2. Slide the battery cover back into place.

3. If you are charging the batteries for the rst time, place the handset on the base to

charge for at least 24 hours continuously.

Press down

Slide