Installation manual

36 MTM700/MTM800 Mobile Terminal / Installation Manual INSTALLATION
Terminal Installation
Standard Control Head Installation
The Standard Control Head can be removed from the housing and turned to any position within a
180° radius. This provides multiple mounting options for the terminal. For example, the terminal may
be mounted on either side of the vehicle to facilitate the safest and most ergonomically ideal posi-
tion. The Standard Control Head may then be turned to provide the most convenient access.
To reposition the Standard Control Head:
1. Insert the Dismantling tool (Motorola P/N 6686119B01
) in the groove between the Standard
Control Head and the terminal assembly as shown in the Figure.
2. Press on the dismantling tool until the snap connectors on the side of the Standard Control
Head release from the terminal assembly.
3. Pull the Standard Control Head away from the terminal assembly.
Figure 4 Typical Control Head Removal
Dismantling
Tool
ZWG0130209-O