Installation manual

INSTALLATION MTM700/MTM800 Mobile Terminal / Installation Manual 43
Mounting the Radio in the Frame
1. Provide the electrical connections to the radio for power, antenna and accessories.
2. Plug in all the connectors and push the radio with its Remote Mount Head or alternatively the
Expansion Head firmly into the mounting frame until the two springs snap into place.
Remove the Radio from the Frame
1. Push the two demount tools through the openings in the frame until the two springs release.
2. Slide out the Radio.
RADIO
SPECIFIC
NOTE
The fixing tabs should be checked for tightness each time the radio is removed.
The tabs are easily tightened by twisting a large flat-bladed screwdriver in the slot
behind the tabs.
The frame is not designed for daily mounting and demounting.
Table 4
DIN Mount Kit Components
Item Description Part Number
DIN Mount Kit RLN4781_
1 Demount Tool 8164298B01
2 Silicon Rubber 3285955Z01
3 Screws to secure the frame 0312002B14