Installation manual
Table Of Contents
- COPYRIGHT
- IMPORTANT SAFETY INFORMATION
- DOCUMENT HISTORY
- CONTENTS
- SCOPE
- MODEL INFORMATION & ACCESSORIES
- INSTALLATION
- Introduction
- DC Power Cable Installation
- Ignition Sense Cable Installation
- Terminal Installation
- Enhanced Control Head Installation
- Trunnion Installation
- Dashboard Installation
- Desktop Installation
- Remote Mount Installation
- Installing the Remote Mount Enhanced Control Head onto the Remote Mount Trunnion
- Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket
- Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame
- Adding Extra Connectivity to the Remote Head
- Installing the Accessories Expansion Cable
- Motorcycle Mount Enhanced Control Head Installation
- Data Expansion Head Enhanced Installation
- Connectors and Pin Assignment of the Radio
- Connectors and Pin Assignment of Data Expansion Head Enhanced and Remote Head Enhanced
- Connector and Pin Assignment of the Enhanced Control Head
- Connecting Cables
- Motorcycle Mount Enhanced Control Head-to-Remote Head Enhanced/Data Expansion Head Enhanced (Motorcycle Mount TELCO Cable)
- Remote Mount Enhanced Control Head/Motorcycle Mount Enhanced Control Head-to-Accessories (Accessories Expansion Cable)
- Radio-to-Junction Box
- Data Expansion Head Enhanced Radio-to-Data Device
- Data Expansion Head Enhanced Radio-to-Fist Microphone
- Radio-to-Data Device: Active Data Cable
- Vehicle Antenna Installation
- External Speaker Installation
- UPGRADING THE TERMINAL
- APPENDIX
22 MTM800 Enhanced Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES
Model Specifications*
*) Technical information may be subject to change without further notice.
GENERAL RECEIVER TRANSMITTER
ETSI: ETS 300 394-1 Receiver Type: Superheterodyne Modulation Type:
π/4DQPSK
Type Number: Frequency Range: RF Power:
MTM800 ENH 410-470 MHz
MTM800 ENH 806-870 MHz
MTM800 ENH 350-390 MHz
MTM800 ENH 380-430 MHz
MT512M
MT712M
MT812M
MT912M
MTM800 ENH
MTM800 ENH
MTM800 ENH
MTM800 ENH
380-430 MHz
851-870 MHz
350-390 MHz
410-470 MHz
TMO
DMO
Temperature Range for Transceiver: Channel Spacing: 25 kHz Frequency Range TMO:
Operating
Storage:
-30°C to +60°C
-40°C to +85°C Sensitivity (3.5%) BER: -112 dBm
MTM800 ENH
MTM800 ENH
MTM800 ENH
MTM800 ENH
380-430 MHz
806-825 MHz
350-390 MHz
410-470 MHz
Power Supply:
Minimum:
Nominal:
Maximum:
Max. Current
10.8 Vdc
13.2 Vdc
15.6 Vdc
Approx. 3.5 A
Intermodulation:
Blocking (50-100 kHz):
-47 dBm
-40 dBm
Frequency Range DMO:
MTM800 ENH
MTM800 ENH
MTM800 ENH
MTM800 ENH
380-430 MHz
851-870 MHz
350-390 MHz
410-470 MHz
Dimensions (HxWxD) in mm: Spurious Rejection: -45 dBm Frequency Stability:
Transceiver with
Enhanced Control Head,
Dash Mount 60 x 185 x 175
Adjacent Channel
Interference Ratio: -45 dB
Locked to Base
Not Locked to Base
+/-100 Hz
+/- 1 kHz
Weight in grams: Frequency Stability: Spurious Emissions:
Transceiver with
Enhanced Control Head,
Dash Mount 1430
Locked to Base
Unlocked to Base
+/-100 Hz
+/- 1 kHz
Conducted/Radiated - 36 dBm <=1GHz
- 30 dBm > 1GHz
Audio Rated (@4 Ohms):
For External Speaker:
Distortion at Rated Audio:
10 W
5% Max.
Adjacent Channel Power Ratio (@ ±
25kHz)
350-390 MHz
380-430 MHz
806-870 MHz
410-470 MHz - 60 dBc