Installation manual
Table Of Contents
- COPYRIGHT
- IMPORTANT SAFETY INFORMATION
- DOCUMENT HISTORY
- CONTENTS
- SCOPE
- MODEL INFORMATION & ACCESSORIES
- INSTALLATION
- Introduction
- DC Power Cable Installation
- Ignition Sense Cable Installation
- Terminal Installation
- Enhanced Control Head Installation
- Trunnion Installation
- Dashboard Installation
- Desktop Installation
- Remote Mount Installation
- Installing the Remote Mount Enhanced Control Head onto the Remote Mount Trunnion
- Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket
- Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame
- Adding Extra Connectivity to the Remote Head
- Installing the Accessories Expansion Cable
- Motorcycle Mount Enhanced Control Head Installation
- Data Expansion Head Enhanced Installation
- Connectors and Pin Assignment of the Radio
- Connectors and Pin Assignment of Data Expansion Head Enhanced and Remote Head Enhanced
- Connector and Pin Assignment of the Enhanced Control Head
- Connecting Cables
- Motorcycle Mount Enhanced Control Head-to-Remote Head Enhanced/Data Expansion Head Enhanced (Motorcycle Mount TELCO Cable)
- Remote Mount Enhanced Control Head/Motorcycle Mount Enhanced Control Head-to-Accessories (Accessories Expansion Cable)
- Radio-to-Junction Box
- Data Expansion Head Enhanced Radio-to-Data Device
- Data Expansion Head Enhanced Radio-to-Fist Microphone
- Radio-to-Data Device: Active Data Cable
- Vehicle Antenna Installation
- External Speaker Installation
- UPGRADING THE TERMINAL
- APPENDIX
40 MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION
Remote Mount Installation
Figure 11 Remote Mount Installation with Remote Head Enhanced/Data Expansion Head Enhanced
Table 5 Associated Components for Remote Mount
Item Description Part Number
1 Remote Mount Cable, 3 m RKN4077
2 Remote Mount Cable, 5 m RKN4078
3 Remote Mount Cable, 5 m RKN4079
4 Remote Mount Cable, 10 m PMKN4020
5 Speaker Extension Cable GMKN4084
6 Remote Head Enhanced PMLN4904
7 Data Expansion Head Enhanced PMLN4908
8 Toroid EMC Suppression Kit 01015001001
The Remote Mount Cable have to be wound 10 times
around each toroid.
Each toroid have to be placed 30.0±2.5 cm respectively
from the expansion head and the control head.
Winding at both ends reduces the effective cable length
approximately by 0.8 m.
Fix the toroids firmly to a stable surface once the Remote
Mount Cable is connected.
Transceiver
10-Pin
Connector
Remote Mount Cable
Remote Mount Enhanced
10-Pin
Connector
Remote Head
or
Data Expansion
Head Enhanced
Enhanced
Flex
Control Head
Toroid
Toroid
10x
10x