Installation manual
Table Of Contents
- COPYRIGHT
- IMPORTANT SAFETY INFORMATION
- DOCUMENT HISTORY
- CONTENTS
- SCOPE
- MODEL INFORMATION & ACCESSORIES
- INSTALLATION
- Introduction
- DC Power Cable Installation
- Ignition Sense Cable Installation
- Terminal Installation
- Enhanced Control Head Installation
- Trunnion Installation
- Dashboard Installation
- Desktop Installation
- Remote Mount Installation
- Installing the Remote Mount Enhanced Control Head onto the Remote Mount Trunnion
- Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket
- Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame
- Adding Extra Connectivity to the Remote Head
- Installing the Accessories Expansion Cable
- Motorcycle Mount Enhanced Control Head Installation
- Data Expansion Head Enhanced Installation
- Connectors and Pin Assignment of the Radio
- Connectors and Pin Assignment of Data Expansion Head Enhanced and Remote Head Enhanced
- Connector and Pin Assignment of the Enhanced Control Head
- Connecting Cables
- Motorcycle Mount Enhanced Control Head-to-Remote Head Enhanced/Data Expansion Head Enhanced (Motorcycle Mount TELCO Cable)
- Remote Mount Enhanced Control Head/Motorcycle Mount Enhanced Control Head-to-Accessories (Accessories Expansion Cable)
- Radio-to-Junction Box
- Data Expansion Head Enhanced Radio-to-Data Device
- Data Expansion Head Enhanced Radio-to-Fist Microphone
- Radio-to-Data Device: Active Data Cable
- Vehicle Antenna Installation
- External Speaker Installation
- UPGRADING THE TERMINAL
- APPENDIX
44 MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION
Adding Extra Connectivity to the Remote Head
The Accessories Expansion Cable (PMKN4029/PMKN4056) allows users to have extra connectivity
to accessories via the Mobile Microphone Port (MMP) and USB port.
Figure 15 The Accessories Expansion Cable with the Mobile Microphone Port (MMP)/USB Port Module
Installing the Accessories Expansion Cable
1. Plug in the Accessories Expansion Cable to the subD Port of the Remote Mount Enhanced
Control Head.
2. Tighten the screws at the subD connector to secure the Accessories Expansion Cable in
place.
3. The Mobile Microphone Port (MMP)/USB port module can be mounted to a variety of
surfaces. Tighten the two screws at both sides of the module to fix it securely in place.
* For more information on the connector pin functions of the Accessories Expansion Cable and the
Mobile Microphone Port (MMP)/USB Port Module, please see
Table 17 on page 70.
Accessories Expansion Cable (PMKN4029/PMKN4056)
Mobile Microphone Port/USB Port Module