Installation manual
Table Of Contents
- COPYRIGHT
- IMPORTANT SAFETY INFORMATION
- DOCUMENT HISTORY
- CONTENTS
- SCOPE
- MODEL INFORMATION & ACCESSORIES
- INSTALLATION
- Introduction
- DC Power Cable Installation
- Ignition Sense Cable Installation
- Terminal Installation
- Enhanced Control Head Installation
- Trunnion Installation
- Dashboard Installation
- Desktop Installation
- Remote Mount Installation
- Installing the Remote Mount Enhanced Control Head onto the Remote Mount Trunnion
- Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket
- Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame
- Adding Extra Connectivity to the Remote Head
- Installing the Accessories Expansion Cable
- Motorcycle Mount Enhanced Control Head Installation
- Data Expansion Head Enhanced Installation
- Connectors and Pin Assignment of the Radio
- Connectors and Pin Assignment of Data Expansion Head Enhanced and Remote Head Enhanced
- Connector and Pin Assignment of the Enhanced Control Head
- Connecting Cables
- Motorcycle Mount Enhanced Control Head-to-Remote Head Enhanced/Data Expansion Head Enhanced (Motorcycle Mount TELCO Cable)
- Remote Mount Enhanced Control Head/Motorcycle Mount Enhanced Control Head-to-Accessories (Accessories Expansion Cable)
- Radio-to-Junction Box
- Data Expansion Head Enhanced Radio-to-Data Device
- Data Expansion Head Enhanced Radio-to-Fist Microphone
- Radio-to-Data Device: Active Data Cable
- Vehicle Antenna Installation
- External Speaker Installation
- UPGRADING THE TERMINAL
- APPENDIX
62 MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION
Connectors and Pin Assignment of Data Expansion Head
Enhanced and Remote Head Enhanced
Figure 27 Data Expansion Head Enhanced - Front View and Connector Location
Figure 28 Remote Head Enhanced - Front View and Connector Location
10-Pin TELCO Connector
Data Expansion Head Enhanced:
a) The 10-pin TELCO connector can be used to connect a customized adapter, for example,
for
connecting the helmet including microphone/earpiece (non-Motorola accessory) or an external
PTT. The customized adapter will be connected via the cable RKN4077.
b) The 10-pin TELCO connector can be used to connect a remote mount Enhanced Control Head.
DO NOT connect any other accessories (for example, microphone). This might result in
malfunctioning hardware failure.
Remote Head Enhanced:
The 10-pin TELCO connector of the Remote Head Enhanced can be used in the same way as
described on b).
Front View
CAUTION:
NOT
NOT a Microphone Connector
25-Pin subD
Connector
9-Pin subD
Connector
1
13
14
25
1
5
6
9
10-Pin TELCO
Connector
J302
12345678910
Front View
CAUTION:
NOT
NOT a Microphone Connector
J302
12
345678
910
10-Pin TELCO Connector