User Manual

Making and Receiving Phone Calls 21
Making and Receiving Phone Calls
Switching the Phone On and Off
To switch the phone on or off, press and hold the S key. If VibraCall™ is selected, the phone
will vibrate when it is switched on.
If you switch the phone on and there is no SIM card inserted, you will be asked to insert one.
Once inserted, the phone will check that the SIM card is valid.
A number of messages will then be displayed:
• Enter PIN - a request to enter the SIM card PIN code (if required).
• Enter Phone Unlock Code - a request to enter the phone unlock code (if
required).
• Searching... followed by a network name - as the phone searches and then finds a
suitable network to connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter AO.
As you type in each digit of the PIN code a
* character will be displayed.
If you make a mistake, press and release the
C key to remove the last digit. Holding the
C key down will remove the entire entry.
When the PIN code is complete press the
O key.
If the PIN code entered is incorrect, the warning message
Wrong PIN will be displayed,
followed by
Enter PIN.
! If the PIN number is entered incorrectly three times in a row, your phone will
automatically lock-up and the Blocked message will be displayed. See
‘Unblocking Your Phone’ for details on unblocking your phone.
The PIN code can be changed, see ‘Change SIM PIN Code’ in the Phone Setup Menu section
for more details.
j Entering Your Unlock Code
If your phone displays the message Enter Phone Unlock Code you must enter your
unlocking code by entering
BO.
The unlock code is a four digit number which is set at manufacture to 1234. The code can be
changed, see ‘Change Unlock Code’ in the
Phone Setup Menu section for more details.
If you forget your unlock code, press the
$ key. This will display the ‘Change Unlock Code’
option. Enter
O D, enter a new unlock code, and press O.
(A5) 05_pg21_30 usephone.fm Page 21 Wednesday, August 18, 1999 5:41 PM