User Manual

Making and Receiving Phone Calls
24
Receiving a Phone Call
To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is GSM900 or 1800 service.
• Your Call Diversion and Call Barring settings should not be set to divert or bar incoming
calls.
When your phone receives a call, it will ring or vibrate and the display will show the Call
message (if you have Caller Line Identification, the caller’s number or name will be displayed
instead).
To answer the call, press
O or open the flip (only on models with a flip when the ‘Key Answer
Only’ feature is set to Off).
When the identification is displayed, you can decide whether or not to answer the call by
pressing
O, a numeric key (1 to 9), < or >. To set this option, see ‘Key Answer
Only’. You can also answer using the keys if the phone rings whilst the phone is already open.
If you do not wish to answer a call you can either:
Press and release the C key. If you have enabled the ’Detailed Diverting - If Busy’ or
‘Divert when unavailable’ options in the Options Menu, the caller will be diverted to the
forwarding number, otherwise the caller will hear the busy tone.
or
Press and hold the
C key. This will reject the incoming call. No call divert option will
be offered.
If your phone rings and you do not answer it, the message Unanswered Call will be
displayed to show you that a call attempt was received.
Ending a Phone Call
To end a phone call, press O, C or close phone.
(A5) 05_pg21_30 usephone.fm Page 24 Wednesday, August 18, 1999 5:41 PM