Laptop User Manual

4 - 32 VC5090 Vehicle Computer Product Reference Guide
Figure 4-43 Trace Route Window
Enter an IP address or a DNS Name in the IP combo box, and tap
Start Test. The IP combo box should match the
information shown in the
ICMP Ping window’s IP combo box. When starting a test, the trace route attempts to find
all routers between the vehicle computer and the destination. The Round Trip Time (RTT) between the vehicle
computer and each router appears, along with the total test time. The total test time may be longer than all RTTs
added together because it does not only include time on the network.
Known APs Window
The Known APs window displays the APs in range using the same ESSID as the vehicle computer. This window is
only available in
Infrastructure mode. To open the Known APs window, tap Known APs in the Wireless Diagnostics
window.
Figure 4-44 Known APs Window
See Table 4-23 for the definitions of the icons next to the AP.
Table 4-23 Current Profile Window
Icon Description
The AP is the associated access point, and is set to mandatory.
The AP is the associated access point, but is not set to mandatory.
The vehicle computer is not associated to this AP, but the AP is set as mandatory.
The vehicle computer is not associated to this AP, and AP is not set as mandatory.