Specifications

14 VC6000 Series Vehicle Computers
Connecting the VC6000 Series Indoor
When using the VC6000 Series indoor, the VC6000 Series can be
placed on a desk and powered using an Indoor Power Supply Unit.
To connect the VC6000 Series indoor:
1. Connect a ground wire between the VC6000 Series and the facility
ground system.
The ground wire ring lugs should be connected to the Ground Point
(GND) at the back of the VC6000 Series using M4 screw.
WARNING: To ensure proper grounding, use a 18AWG ground
wire between the VC6000 Series Ground Point (GND)
and the facility ground system.
12 V DC Cable
AC Cord
Ground Point
GND
Indoor Power Supply Unit
For indoor use only in dry locations
Power Connector
WLAN Antenn
a
Connector
WWAN Antenna Connector
100-240 V AC / 50-60 Hz Power Outlet