Owner manual

11
VT1000v Series Voice Terminal User Guide
8
Pick up the telephone hand set and listen for a dial tone
If you hear a dial tone, you can now call anyone as you normally would on any
telephone.
If you do not hear a dial tone, check that all connections described in this
procedure are correct. If you still do not hear a dial tone, you may need to
connect a computer to your Motorola voice terminal and perform Basic
Configuration. If after performing Basic Configuration, you still do not hear a dial
tone, see “Troubleshooting” on page 21 or call your VoIP provider.
VT1000User.book Page 11 Monday, November 3, 2003 4:19 PM