Technical information

Chapter 2: AT+i Commands Reference
May 31, 2008 AT+i Commands Reference Manual 2-101
• During a remote AT+i session, the remote client taking over the parser cannot make use of
W24's mechanisms of Hardware or Software flow control, which exist for the local host port.
The only mechanism W24 will use is this mode is TCP level flow control (using the TCP
window).
• In W24 WLAN, AT+IBDR or AT+IBDRA will return I/OK but will not initiate a baud rate
detection process.
• The remote AT+i commands socket cannot be used to send AT+i command to W24 when
W24 is in SerialNET mode.