Technical information

Nonvolatile Parameter Database
2-130 AT+i Commands Reference Manual May 31, 2008
+iUSRN - Define Connection User Name
+iPWD - Define Connection Password
Result Code:
I/OK If v is within limits.
I/ERROR Otherwise.
AT+i ATH ~v Temporarily sets the authentication method to v for the duration
of the next session. The permanent value will be restored after
completing the session, whether the session was successful or not.
AT+iATH? Reports the current setting of the authentication method followed
by I/OK.
AT+iATH=? Returns the message "0-2" followed by I/OK.
Syntax: AT+iUSRN=user
Sets connection user name.
Parameters: user=User name to be used when logging onto the ISP.
Command Options:
user=" " Empty: No user name defined.
user=<user-name> user-name is used to login to the ISP.
Default:
user=" " Empty. No user name defined. The login user name can be
defined ad-hoc.
Result Code:
I/OK If user is an empty or legal ISP login name.
I/ERROR Otherwise.
AT+i US RN ~user Temporarily sets the login user name to user. The permanent
value will be restored after completing the next session, whether
the session was successful or not.
AT+iUSRN? Reports the current login user name. If the user name does not
exist, only <CRLF> is returned. The reply is followed by I/OK.
AT+iUSRN=? Returns the message "String" followed by I/OK.
Syntax: AT+iPWD=pass
Sets connection password.
Parameters: pass=Password to be used when logging onto the ISP.