Technical information

Nonvolatile Parameter Database
2-136 AT+i Commands Reference Manual May 31, 2008
+iSMA - SMTP Authentication Method
+iSMU - Define SMTP Login User Name
Syntax: AT+iSMA=v
Permanently sets SMTP authentication method.
Parameters: v= 0 or 1
Command Options:
v=0 SMTP authentication is disabled.
v=1 W24 will support the "AUTH LOGIN" SMTP authentication
method, if forced by SMTP server.
Default: 0 (SMTP authentication disabled).
Result Code:
I/OK If v = 0 or 1.
I/ERROR Otherwise.
AT+iSMA? Report the current value of the SMTP authentication method.The
reply is followed by I/OK.
AT+iSMA=? Returns the message "0-1".
Syntax: AT+iSMU=user
Permanently sets Authenticated SMTP login User Name.
Parameters: user = User Name to be used when logging on to an SMTP server
that requires authentication (if SMA is set to a non zero value).
Command Options:
user='' Empty: No SMTP authentication User Name defined.
user=<user-name> user-name will be used to login to an authenticated SMTP server.
Default: Empty. No User Name defined.
Result Code:
I/OK If user is an empty or a legal SMTP login name.
I/ERROR Otherwise.
AT+i SM U~user Temporarily set the SMTP login User Name to user. The
permanent value will be restored after completing the next
session, whether the session was successful or not.
AT+iSMU? Report the current SMTP login User Name. If the User Name
does not exist, only <CRLF> will be returned. The reply is
followed by I/OK.