Technical information

Chapter 2: AT+i Commands Reference
May 31, 2008 AT+i Commands Reference Manual 2-155
+iRAP - Password for RAS Authentication
user="*" A user-name will not be required to authenticate a remote PPP
client connection to W24's internal RAS, effectively unrestricting
remote access.
Default: Empty. W24's internal RAS is effectively disabled.
Result Code:
I/OK If user is an empty or a legal login User Name.
I/ERROR Otherwise.
AT +i R AU ~user Temporarily set the RAS login User Name to user. The
permanent value will be restored after completing the next
session, whether the session was successful or not.
AT+iRAU? Report the current RAS login User Name. If the User Name does
not exist, only <CRLF> will be returned. The reply is followed by
I/OK.
AT+iRAU=? Returns the message 'String'. The reply is followed by I/OK.
Syntax: AT+iRAP=Pass
Sets the RAS Password.
Parameters: Pass = Password to be used for login authentication when
accepting a call from a PPP client connecting to W24's internal
RAS.
Command Options:
Pass ='' or Pass="*" A password will not be required to authenticate a remote PPP
client connection to W24's internal RAS.
Pass =<password> password will be used to restrict access of a remote PPP client
connection to W24's internal RAS.
Default: Empty. No Password defined.
Result Code:
I/OK If pass is an empty or legal Password.
I/ERROR Otherwise.
AT+i RA P~pass Temporarily set the RAS password to pass. The permanent
Password will be restored after completing the next session,
whether the session was successful or not.
AT+iRAP? Report the current RAS Password. If a Password does not exist,
only <CRLF> will be returned. The reply is followed by I/OK.
AT+iRAP=? Returns the message 'String'. The reply is followed by I/OK.