Technical information

Nonvolatile Parameter Database
2-160 AT+i Commands Reference Manual May 31, 2008
+iWLWM - Wireless LAN WEP Mode
+iWLKI - Wireless LAN Transmission WEP Key Index
ssid=!<ID> W24 will search for an ad-hoc network with the specified ID. If it
finds one it will join it, otherwise it will create a new network
with this ID.
Default: Empty. No SSID defined.
Result Code:
I/OK If ssid is an empty or legal SSID string.
I/ERROR Otherwise.
AT +i W LS I ~ssid Temporarily sets the SSID to ssid. The permanent value will be
restored after completing the next session.
AT+iWLSI? Reports the current ssid value followed by I/OK.
AT+iWLSI=? Returns the message 'String'. The reply is followed by I/OK.
Syntax: AT+iWLWM=md
Sets the Wireless LAN WEP operation mode.
Parameters: md = 0..2.
Command Options:
md=0 WEP Disabled.
md=1 WEP Enabled, using 64-bit keys.
md=2 WEP Enabled, using 128-bit keys.
Default: 0 - WEP disabled.
Result Code:
I/OK if md is within limits.
I/ERROR Otherwise.
AT+iWLWM~md Temporarily set the WEP operation mode to md. The permanent
value will be restored after completing the next session, both if
the session was successful or not.
AT+iWLWM? Report the current WEP mode used. The reply is followed by
I/OK.
AT+iWLWM=? Returns the message '0-2'. The reply is followed by I/OK.
Syntax: AT+iWLKI=ki
Sets the Wireless LAN transmission WEP-Key index.