Technical information

Nonvolatile Parameter Database
2-182 AT+i Commands Reference Manual May 31, 2008
+iSDT - SerialNET Dialup Timeout
Syntax: AT+iSDT=n
Permanently sets the SerialNET Dial timeout when waking up a
remote SerialNET server.
Parameters: n = Number of seconds to allow after dialing up the remote
SerialNET server, before hanging up.
Command Options:
n = 0..255 [seconds].
Default: 20 [seconds].
Result Code:
I/OK If n is within limits.
I/ERROR Otherwise.
AT+iSDT? Report the current SerialNET dial timeout. The reply is followed
by I/OK.
AT+iSDT=? Returns the message "0-255". The reply is followed by I/OK.