Technical information

Chapter 2: AT+i Commands Reference
May 31, 2008 AT+i Commands Reference Manual 2-183
+iSWT - SerialNET Wake-Up Timeout
Syntax: AT+iSWT=n
Sets the SerialNET wake-up timeout when waking up a remote
SerialNET server.
Parameters: n = Number of seconds to allow the entire SerialNET server
wakeup procedure before hanging up and retrying.
Command Options:
n = 0..65535 [seconds].
Default: 600 [seconds].
Result Code:
I/OK If n is within limits.
I/ERROR Otherwise.
AT+iSWT? Report the current SerialNET Wake-up timeout. The reply is
followed by I/OK.
AT+iSWT=? Returns the message "0-65535". The reply is followed by I/OK.