Technical information
Chapter 1: Introduction to AT+i Commands
May 31, 2008 AT+i Commands Reference Manual 1-11
Wireless LAN
WLTR WLAN transmission rate Sets the maximum allowable WLAN transmission rate.
WLPW WLAN Tx power Sets the transmission power of the Marvell WLAN
chipset.
WRFU WLAN radio up Turns on radio transmission of the Marvell WLAN
chipset.
WRFD WLAN radio down Turns off radio transmission of the Marvell WLAN
chipset.
WRST Reset WLAN chipset Performs a hardware reset of the Marvell WLAN
chipset.
WLBM WLAN b mode Sets the Marvell WLAN chipset to 802.11/b mode.
WLGM WLAN g mode Sets the Marvell WLAN chipset to 802.11/g mode.
Remote Firmware Update
RFU Remote firmware update Updates firmware from a remote HTTP or FTP server.
Table 1-1: AT+i Commands by Category (Cont.)
Command Function Parameters/Description










