Technical information

Chapter 1: Introduction to AT+i Commands
May 31, 2008 AT+i Commands Reference Manual 1-13
63 ~CTSH needs to be LOW to
change to hardware flow control.
64 User aborted last command
using '---'
65 RESERVED 66 RESERVED
67 Command ignored as irrelevant 68 W24 serial number already
exists
69 Timeout on host communication 70 Modem failed to respond
71 No dial tone response 72 No carrier modem response
73 Dial failed 74 Modem connection with ISP
lost
-or-
WLAN connection lost
75 Access denied to ISP server 76 Unable to locate POP3 server
77 POP3 server timed out 78 Access denied to POP3 server
79 POP3 failed 80 No suitable message in
mailbox
81 Unable to locate SMTP server 82 SMTP server timed out
83 SMTP failed 84 RESERVED
85 RESERVED 86 Writing to internal non-volatile
parameters database failed
87 Web server IP registration failed 88 Socket IP registration failed
89 E-mail IP registration failed 90 IP registration failed for all
methods specified
91 RESERVED 92 RESERVED
93 RESERVED 94 In Always Online mode,
connection was lost and
re-established
96 A remote host, which had taken
over W24 through the LATI
port, was disconnected
98 RESERVED
99 RESERVED 100 Error restoring default
parameters
101 No ISP access numbers defined 102 No USRN defined
103 No PWD entered 104 No DNS defined
105 POP3 server not defined 106 MBX (mailbox) not defined
107 MPWD (mailbox password) not
defined
108
TOA (addressee) not defined
109 REA (return e-mail address) not
defined
110 SMTP server not defined
Table 1-2: AT+i Result Code Summary (Cont.)
Response
String
Denotation