Technical information

IP Registration
2-48 AT+i Commands Reference Manual May 31, 2008
to the server defined in RRSV during the registration procedure. When a socket is established,
W24 transmits its ID information and current IP address (or the RRRL) in the following format:
"iChip-<D/L/S> S/N:<RP5> version: <RP1> HN:<HSTN> IP:<IPA or
RRRL> Port:<LPRT or 80 or 0>"
The registration socket is then closed.
Web Server Registration
W24 registers itself by surfing to a web server with its ID information and current IP address as
parameters.
If the RRWS parameter contains a URL (of a registration web server), W24 registers its ID
information and IP using the URL by issuing a GET command along with a fixed format
parameter line:
"<RRWS path>?SN=<RP5>&IP=<IPA or RRRL>&WPt=<0 or the port defined
in RRRL>&HN=<HSTN>".
The web server must contain a CGI, .asp page, exe, etc., which make use of these parameters to
register the W24.
If several registration parameters are configured, W24 goes through multiple registration
processes. If more than one registration process fails, W24 returns an I/ERROR describing the
first failure encountered. If all registrations fail, W24 returns I/ERROR(90).