Instruction Manual

SECTION 3 CONFIGURATION
3-18 WA840G
Configuring Network Address
This screen allows you to change your Connection Mode and IP
settings.
To access the screen, click Control Panel > Network Access.
Field Description
LAN Ethernet
MAC Address
Displays the unit’s Ethernet MAC address.
Connection Mode The access point supports two connection
modes for acquiring its own IP configuration
settings:
! DHCP
! Static Assigned
Select the appropriate connection mode for
your network.
Connection
Status
Provides current information about the
connection status of the access point.
IP Address Displays the access point’s IP Address used to
connect to your network.
If DHCP is selected, this is the IP Address that
your access point is currently using to access
the Internet. If using Static Assigned, enter the
IP Address here.